Μετατροπέας διασύνδεσης σειριακής διεπαφής IIC I2C 5V LCD1602
Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.
This module is thinner than the usual. Standard I2C address is 0x20. It is not immediately visible, but A0,A1,A2 are physically connected to low. So to set up a different address you have to cut the connection, and solder desired pin to high. Also it is using nonstandard addresses, so instead of the original liquidcrystal i2c library you have to use this: https://github.com/t3chguy/LiquidCrystal_I2C_GY
nice product
Nice tiny useful
I had few LCD and I was in need to spare some Arduino pins to use them for the I&C and i found this adapter as a good way of doing it. Like it and it worth the money i paid. Although, the adjustable trimmer might be a little bigger :)
Δεν έχει δοκιμαστεί ακόμα, αλλά μοιάζει με τους άλλους που έχω χρησιμοποιήσει
Γρήγορη και αποτελεσματική μεταφορά. Η παραγγελία είναι πακεταρισμένη. Θα το δοκιμάσω αργότερα.
The I2C interface for LCD is ok
Καλή ποιότητα!
Μονάδα χαμηλής ποιότητας και δύσκολα συγκολλάται. Δεν συνιστώ αυτό το μοντέλο. Σπάει πολύ εύκολα και αν συγκολληθεί καταστρέφει και την άλλη μονάδα.
good deal