Apexhunter
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

Apexhunter 09/02/2020
The board I ordered was supposed to be the Version 1 board, but they sent the same version 2 board that does not work with the Laser as advertised. This is the last straw everytime I buy buy from Banggood I am dissappointed with their quality, build instructions and/or usability of their products. Not happy
Πίνακας ελέγχου 3018 CNC Router 3 άξονες GRBL USB Οδηγός βημάτων Κατασκευαστής DIY Laser Engraver Μηχανή φρεζαρίσματος εγχάραξης Ελεγκτής
US$38.10 US$39.99
4
Συστάσεις
Σχόλια (0)
Apexhunter 19/01/2020
Quality looks good, looks very well built, BUT, the controler board on my machine is the newer version 2 board which only has two pins making this laser useless. Banggood needs to come up with a solution for all of us who have bought this laser only to find it cannot be fitted to the controller board. Final thoughts, I should have reviewed others comments before buying this laser, if I had I would not have bought the laser because it cannot be used with the version 2 controler boards. Banggood, any comments?
Ενότητα Λέιζερ Μπλε 2500mW 3-Πιν DIY Ενότητα Χάραξης με Λέιζερ Ταιριάζει στον Δρομολογητή CNC 3018
US$109.24 US$113.99
3
Συστάσεις
Σχόλια (1)
Fan'ensheng 3018 Μίνι DIY Φρέζα CNC με 3 άξονες και τυπικό κινητήριο άξονα για χάραξη ξύλου και ξυλογλυπτική
US$259.99 US$349.99

Ερ: Can limit switches be added to the Version 2 board?

Ερώτηση από Apexhunter επί 2020-02-06 04:08:30

Gimpydow89 what do you mean by 2 board

2020-03-05 09:15:26 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
Ενότητα Λέιζερ Μπλε 2500mW 3-Πιν DIY Ενότητα Χάραξης με Λέιζερ Ταιριάζει στον Δρομολογητή CNC 3018
US$109.24 US$113.99

Ερ: I bought a 3018 cnc and I want to fit this kind of laser. The board is version 2 and connection for laser has only two pins, but in the board there are more connection points. Where can I get more info?

Ερώτηση από alonsomaria επί 2020-01-05 04:12:07

Apexhunter Their answer is not an answer at all. The controller board only has a 2 pin out for the laser. This laser comes with a 3 pin plug. WTF are we supposed to do. I am so sick of asking questions and not getting answers from these idiots. READ THE QUESTIONS AND ANSWER THEN. If you do not understand English very well, then hire someone who does.

2020-02-25 06:04:28 Βοηθητικός (5)
υποβάλλουν
Απαντήσεις (4)
Ενότητα Λέιζερ Μπλε 2500mW 3-Πιν DIY Ενότητα Χάραξης με Λέιζερ Ταιριάζει στον Δρομολογητή CNC 3018
US$109.24 US$113.99

Ερ: OK, where does this plug in on my control board from my 3018? The laser port on the board only has two pins, the wire is a 3 pin plug.

Ερώτηση από Apexhunter επί 2020-01-18 04:33:44

Fascine Our machine is equipped with a 3P plug-in. The line order is the same, use it directly.

2020-02-14 12:44:17 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (1)
Apexhunter 18/01/2020
OK the item arrived at my son's house in another state because Banggood wouldn't ship this product to Hawaii. Which is really dumb. I got the device shipped to my home and assembled all the parts and it seems to be well built. The first try worked very well although it was VERY SLOW. It needs more testing to see how much faster I can engrave wood. Today, I received my laser and as I'm installing the laser, I noticed that the set screw on the side of the motor mount was delaminating. I am sure somoene is going to say I tightened the screw too much, but that is not the case. The screw was totally loose as I installed the laser module and only when I went to tighten the screw did I notice the delamination. Do they make a metal mount to replace this one? If not how do I go about getting a replacement motor mount?
Fan'ensheng 3018 Μίνι DIY Φρέζα CNC με 3 άξονες και τυπικό κινητήριο άξονα για χάραξη ξύλου και ξυλογλυπτική
US$259.99 US$349.99
1
Συστάσεις
Σχόλια (1)
Apexhunter 31/05/2018
Once purchased, I received a Thank you email with assembly instructions and a users guide included. The assembly instructions were not complete but with a little common sense, assembly went without a hitch. I am now in the middle of making adjustments to the firmware. The firmware downloaded from Geeetech will not compile so I am trying to figure out why and I can see others have experienced the same thing. The numbering of the parts and the quality of the entire unit were outstanding for the price. Some complained about having black dust but that was no big deal either. I thought the assembly instructions need to be revised to include ALL the steps in the assembly process. and if you would like it done right, contact me.
Εκτυπωτής Geeetech® Prusa I3 Pro W DIY 3D 200x200x180mm Μέγεθος εκτύπωσης 1,75 mm 0,3 mm ακροφύσιο
US$155.00 US$228.25
0
Συστάσεις
Σχόλια (0)
Apexhunter 02/01/2018
The picture used to sell these magnetic balls leads you to believe these balls are larger than they are. It's my own fault for not reading and understanding the metric measurements before committing to purchase. Each ball is smaller than a BB for reference. The magnets are strong and it is fun to play with.
216τμχ 3mm Μαγνητική Μπάλα με κουτί Πολύχρωμο Έξυπνο Εργαλείο Ανακούφισης του Στρες Δώρο
US$11.26 US$16.99
0
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe