BG111185292 if you mean remote access to watch live or recorded video's yes.You can also remotely adjust infrared lights (turn them on,off, used smart night vision)

BG111185292 yes but you will only be able to watch cameras on your monitor.

BG111185292 yes it does. I tried it.

BG111185292 12volt dc output 220volt ac input

BG111185292 if you have less than 3 dots of signal it freezes due to bad rx tx. you can use the internal repeater system and make the cera that freezes to get a signal from another camera which is closer...

BG111185292 on the window that when you try to write your password and says wrong password, left & right click your mouse for 7 times to reset it.

BG111185292 i had the same problem. They say that cameras have one way audio (mic) but they don't.....the picture is taken probably from another brand. They also say 3megapixel but they are only 2 megapixel......

BG111185292 I am not sure if you get one on the site , but for sure you can get a plug adaptor which is very cheap.

BG111185292 I tried to add a camera i had and worked fine. You just have to connect nvrs ethernet cable to the camera, give power to camera, then go to menu video manage, on the upper window you press search and if it appears on that window with ip starting with 192........ you select it and you press add one and it will disappear from upper window and will be shown on the second window down as connected with ip starting with 172....... Then unplug the ethernet cable from camera and it will work wirelessly. To do all that you should have a clear channel on the nvr. If it is an 8 channel and you have one channel unoccupied its ok. If all channels occupied you should delete one camera you don't want add the new one that appears on search.