• Build quality is okey for 30$ • You maybe have to sand down the carbon edges, they can be pretty sharp. • Vista fits perfect, 20x20mm holes in the back. remember you need the longer camera cable. • Air unit doesn‘t fit, the standoffs/antennas are in the way. • The Standoffs could have abetter quality, you maybe have to deburr it. • You definitely need longer screws to mount the dji fpv cam, the stock ones are too short because the gap between the camera and the carbonplates are too big.

• Build quality is okey for 30$ • You maybe have to sand down the carbon edges, they can be pretty sharp. • Vista fits perfect, 20x20mm holes in the back. remember you need the longer camera cable. • Air unit doesn‘t fit, the standoffs/antennas are in the way. • The Standoffs could have abetter quality, you maybe have to deburr it. • You definitely need longer screws to mount the dji fpv cam, the stock ones are too short because the gap between the camera and the carbonplates are too big.

• Build quality is okey for 30$ • You maybe have to sand down the carbon edges, they can be pretty sharp. • Vista fits perfect, 20x20mm holes in the back. remember you need the longer camera cable. • Air unit doesn‘t fit, the standoffs/antennas are in the way. • The Standoffs could have abetter quality, you maybe have to deburr it. • You definitely need longer screws to mount the dji fpv cam, the stock ones are too short because the gap between the camera and the carbonplates are too big.

υποστηρίζει ΜΟΝΟ 22 mm ή μικρότερη φωτογραφική μηχανή fpv. Η κορνίζα φαίνεται γερή. Αγόρασα δύο καρέ και όλα τα όπλα έχουν πάχος 4,86-4,91 χιλιοστών. Είδα μια κριτική για τα καρύδια του Τύπου που δεν ταιριάζουν στις τρύπες. Δεν είναι γραφτό. Απλά κάθονται εκεί που φαίνονται, ταιριάζουν τέλεια στο ρυθμό. Δίνοντας αυτό ένα 4 αστέρων μόνο επειδή μερικές από τις άκρες ήταν τραχύ και ακανθώδες. Τίποτα που να μην μπορεί να φτιάξει ένα χαρτί άμμου.

supports ONLY 22mm or smaller fpv camera. frame seems sturdy. I bought two frames and all of the arms measure 4.86-4.91mm thickness. I saw a review about the press nuts not fitting in the holes well. there are not meant to. they just sit where pictured, they fit right into the groove perfectly. giving this a 4 star only because some of the edges were rough and splintery. nothing some sand paper couldn't fix.

υποστηρίζει ΜΟΝΟ 22 mm ή μικρότερη φωτογραφική μηχανή fpv. Η κορνίζα φαίνεται γερή. Αγόρασα δύο καρέ και όλα τα όπλα έχουν πάχος 4,86-4,91 χιλιοστών. Είδα μια κριτική για τα καρύδια του Τύπου που δεν ταιριάζουν στις τρύπες. Δεν είναι γραφτό. Απλά κάθονται εκεί που φαίνονται, ταιριάζουν τέλεια στο ρυθμό. Δίνοντας αυτό ένα 4 αστέρων μόνο επειδή μερικές από τις άκρες ήταν τραχύ και ακανθώδες. Τίποτα που να μην μπορεί να φτιάξει ένα χαρτί άμμου.