Αυτές οι ρόδες και τα ελαστικά είναι πολύ καλά. Τα τρέχω με τον κεραυνό μου. Αυτή η λαβή είναι πολύ καλή, πολύ ταχύτητα για να κολλάει ο Έζι. Έχω βάλει ένα σετ στο xlfxo3 μου θα πάρω περισσότερα για την αξονική μου. SX 10 που είναι φοβεροί στα ερπετά όπως πάντα Μπάνγκγκουντ έχεις γρήγορη μετά φανταστική τιμή υπηρεσία Banggut είσαι φοβερός

these wheels and tyres are very very very good I'm running them on my zd thunder thay grip really good handle a lot of speed Ezy to glue look awesome I have put a set on my xlfxo3 I will be getting more for My axial scx 10 thay are awesome on the crawlers as always Banggood you have fast post fantastic price fantastic service Banggood you are awesome

Αυτές οι ρόδες και τα ελαστικά είναι πολύ καλά. Τα τρέχω με τον κεραυνό μου. Αυτή η λαβή είναι πολύ καλή, πολύ ταχύτητα για να κολλάει ο Έζι. Έχω βάλει ένα σετ στο xlfxo3 μου θα πάρω περισσότερα για την αξονική μου. SX 10 που είναι φοβεροί στα ερπετά όπως πάντα Μπάνγκγκουντ έχεις γρήγορη μετά φανταστική τιμή υπηρεσία Banggut είσαι φοβερός

I've had these for a few months and I am mostly happy. As others have mentioned, the tires need to be balanced first if you're going to use them in a high speed RC car. I run mine on 3s and have had no problems. The rubber is very durable and the plastic is sturdy but light weight so I am actually getting faster acceleration than with my original FS racing tires. The car can finally do proper wheelies. For balancing I used these little magnets as weights and super glue to hold them to the inside of the wheel: https://www.banggood.com/100pcs-N50-Strong-Disc-Mini-Magnets-5x3mm-Rare-Earth-Neodymium-Magnets-p-985775.html?p=LN24205151027201606U I also taped the inside of the tires so they don't balloon up when going fast. I used gorilla tape but you can use any reinforced tape like for example this one: https://www.banggood.com/5CM-x-5M-Waterproof-Ripstop-DIY-Kite-Sail-Repair-Patch-Tape-p-1077459.html?p=LN24205151027201606U I also bought this extra wide aluminum hex hub set to push the wheels further out so the tires don't rub the body when the car is turning. https://www.banggood.com/RC-Aluminum-7_0-Wheel-Hex-12mm-Drive-4P-HSP-HPI-Tamiya-Car-p-1035543.html?p=LN24205151027201606U In any case, this is one of the best RC parts deals I have ever found and I think the wheels look great on my FS Racing 53810.

I've had these for a few months and I am mostly happy. As others have mentioned, the tires need to be balanced first if you're going to use them in a high speed RC car. I run mine on 3s and have had no problems. The rubber is very durable and the plastic is sturdy but light weight so I am actually getting faster acceleration than with my original FS racing tires. The car can finally do proper wheelies. For balancing I used these little magnets as weights and super glue to hold them to the inside of the wheel: https://www.banggood.com/100pcs-N50-Strong-Disc-Mini-Magnets-5x3mm-Rare-Earth-Neodymium-Magnets-p-985775.html?p=LN24205151027201606U I also taped the inside of the tires so they don't balloon up when going fast. I used gorilla tape but you can use any reinforced tape like for example this one: https://www.banggood.com/5CM-x-5M-Waterproof-Ripstop-DIY-Kite-Sail-Repair-Patch-Tape-p-1077459.html?p=LN24205151027201606U I also bought this extra wide aluminum hex hub set to push the wheels further out so the tires don't rub the body when the car is turning. https://www.banggood.com/RC-Aluminum-7_0-Wheel-Hex-12mm-Drive-4P-HSP-HPI-Tamiya-Car-p-1035543.html?p=LN24205151027201606U In any case, this is one of the best RC parts deals I have ever found and I think the wheels look great on my FS Racing 53810.

I've had these for a few months and I am mostly happy. As others have mentioned, the tires need to be balanced first if you're going to use them in a high speed RC car. I run mine on 3s and have had no problems. The rubber is very durable and the plastic is sturdy but light weight so I am actually getting faster acceleration than with my original FS racing tires. The car can finally do proper wheelies. For balancing I used these little magnets as weights and super glue to hold them to the inside of the wheel: https://www.banggood.com/100pcs-N50-Strong-Disc-Mini-Magnets-5x3mm-Rare-Earth-Neodymium-Magnets-p-985775.html?p=LN24205151027201606U I also taped the inside of the tires so they don't balloon up when going fast. I used gorilla tape but you can use any reinforced tape like for example this one: https://www.banggood.com/5CM-x-5M-Waterproof-Ripstop-DIY-Kite-Sail-Repair-Patch-Tape-p-1077459.html?p=LN24205151027201606U I also bought this extra wide aluminum hex hub set to push the wheels further out so the tires don't rub the body when the car is turning. https://www.banggood.com/RC-Aluminum-7_0-Wheel-Hex-12mm-Drive-4P-HSP-HPI-Tamiya-Car-p-1035543.html?p=LN24205151027201606U In any case, this is one of the best RC parts deals I have ever found and I think the wheels look great on my FS Racing 53810.