buckeyes1997
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

buckeyes1997 13/12/2021
This watch is AMAZING!!! It does everything it says it will do and more. I love the ability to switch the face to various looks depending on what I'm wearing or how I'm feeling. It makes the watch a fashion piece and not just a watch. I like the super bright and vivid display screen which looks fantastic. There are some disappointing features that I should point out.....the blood pressure thing is way off and probably not useful. The watch has a bug and continuously vibrates when using GPS on your phone while tethered (only way to stop is to disconnect phone). The music player is a nice feature and the sound is not great, but does an okay job for A WATCH!!!. The rubber band is decent quality but will likely need to swap to a metal band or something better soon as it'doesn't look like it will last too long, but it does work for now and matches the watch.
[Αναπαραγωγή μουσικής] Bakeey Z18 Δυναμική 1,39 ιντσών AMOLED Πλήρης οθόνη αφής bluetooth Κλήση καρδιακού ρυθμού Πίεση αίματος Οξυγόνο Παρακολούθηση πολ
US$84.30 US$146.99
1
Συστάσεις
Σχόλια (1)
buckeyes1997 20/08/2021
This drone works great. The range is excellent, get 5g rather than 2.4g for more range. The video cuts out before control range ends. Durable construction and excellent overall value.
Eachine E520S GPS WIFI FPV με κάμερα 4K/1080P HD Χρόνος πτήσης 16 λεπτά Αναδιπλούμενο RC Ντρόουν Quadcopter
US$109.99 US$139.99
2
Συστάσεις
Σχόλια (0)
buckeyes1997 30/08/2021
This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!
Creality 3D® Ender-3 Linear Rails Όλα τα κιτ για εκτυπωτή Ender-3S / Ender-3 Pro 3D με αισθητήρα στάθμης
US$166.31 US$172.99
1
Συστάσεις
Σχόλια (2)

buckeyes1997 they were all the same length.

buckeyes1997 30/08/2021
This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!
Creality 3D® Ender-3 Linear Rails Όλα τα κιτ για εκτυπωτή Ender-3S / Ender-3 Pro 3D με αισθητήρα στάθμης
US$166.31 US$172.99
1
Σχόλια (2)
buckeyes1997 27/09/2021
This hot end is EXCELLENT!!! I was having issues with heat creep on my all metal hotend but after installing this unit on my Ender 5 plus I am able to print PLA again without heat creep. The kit comes with all the parts but the printer mount needed modifications before the unit could be mounted. Also it doesn't come with a mount for ender style printers. It looks good and works good so far. I might get a titanium heat break for it to make it even better but I'm happy for now.
Κιτ εκτυπωτή 3D Volcano J-Head Bowden All Metal V6 Hotend με βραχίονα ψύξης με κράμα 1,75 ακροφύσιο για εκτυπωτές 3D
US$29.89 US$25.99
2
Συστάσεις
Σχόλια (0)
Eachine E520S GPS WIFI FPV με κάμερα 4K/1080P HD Χρόνος πτήσης 16 λεπτά Αναδιπλούμενο RC Ντρόουν Quadcopter
US$109.99 US$139.99

Ερ: Good morning, on average, how many days does the product take to arrive in Brazil?

Ερώτηση από BG541718244 επί 2021-10-04 07:27:04

buckeyes1997 not sure. it took about 30 days to USA.

2021-10-04 09:08:15 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (3)
Καλώδιο Bakeey 3 σε 1 7mm 6Led Type C Micro USB Borescope Inspection Camera Soft για υπολογιστή Android
US$13.99 US$16.99

Ερ: is it compatible with iOS, iPad Pro?

Ερώτηση από BG191647484 επί 2020-12-09 09:21:19

buckeyes1997 I only use with Android and PC.

2021-10-04 09:07:52 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (4)
buckeyes1997 27/09/2021
This mount works great and fit my V6 hotend. I like the black anodized aluminum but it scratches easily if you are rough with it.
Συναρμολόγηση κινητήριας μονάδας αλουμινίου BIGTREETECH® V6 για κεφαλή E3D V6 Volcano Bowden Extruder Ender 3 CR10 Εξαρτήματα εκτυπωτή 3D
US$10.38 US$11.32
1
Συστάσεις
Σχόλια (0)
buckeyes1997 21/09/2021
This item was shipped well and arrived undamaged. I am using this part on my Creality printer as an improvement over the stock part which is starting to make noise. This is not as good as an all ball bearing fan, but it should last long enough at a great price. I plan to pick up a few and keep them on hand.
1Pcs 24V 4010 Ανεμιστήρας Ψύξης Turbo με 7000 σ.α.λ. καλώδιο 1,2 μέτρα με τερματικό
US$3.30 US$2.99
1
Συστάσεις
Σχόλια (0)
buckeyes1997 21/09/2021
This product is decent. I was afraid it might show up 3D printed but it is actually injection molded plastic. The bearings are cheap and likely won't last but it should work good for a while and the price,/value was good. My only real issue is alignment can be annoying if you don't get it just right or your printer pulls it at an angle and it knocks over. I put sticky tape on the bottom to help prevent that.
Χωριστός Βάση Ινών PLA ABS Kingroon Ρυθμιζόμενη Ευέλικτη για Εκτυπωτές 3D
US$8.09 US$7.00
1
Συστάσεις
Σχόλια (0)
buckeyes1997 21/09/2021
These are great spare temp sensors for Creality or any other 3D printer. the connector on the end is not what I need but it can be cut off easy. These are decent quality at a great price. Having a few of these on hand will prevent downtime.
Αισθητήρας θερμοκρασίας NTC 3950 100K ohm της Anet® με καλώδιο 1.1m για τον εκτυπωτή 3D RepRap Prusa i3 (5τμχ)
US$5.24 US$4.99
1
Συστάσεις
Σχόλια (0)
buckeyes1997 21/09/2021
These fans really move some air. I am planning to use these on my Creality all metal hot end. it tends to get heat creep when printing low temperature filaments like PLA. Mounting this fan on the upper hot end should keep it cool.
Ανεμιστήρας ψύξης εξαερισμού 2-pin 5015 50x50x15mm DC 24V Anet® 2Pcs
US$5.76 US$9.99
1
Συστάσεις
Σχόλια (0)
buckeyes1997 02/09/2021
These boards are great so far. I can easily talk via Windows 10 over USB and work with the Arduino IDE and included libraries. I wish the SD card slot was not positioned between the headers, as that makes insertion hard if soldered long legs down. Overall this is a decent kit with a super powerful wifi chip and nice little lcd display for all my project needs. I primarily bought it for the uSD slot and that works very well.
LILYGO® TTGO T8 ESP32-S2 V1.1 Οθόνη LCD ST7789 1,14 Ιντσών ασύρματο ασύρματο WiFi Type-c Connector Θέση για κάρτα TF Development Board
US$25.40 US$21.99
2
Συστάσεις
Σχόλια (0)
buckeyes1997 09/09/2021
this model is very good. my son has been playing with it non-stop because of the baggie of accessories that came with it. He's not a fan of the orange color but the sward makes up for color. the stand is not very useful and kind of holds him awkward. Overall, the quality is good and the value is cheaper than I could 3D print it myself.
Figma 2.0 Deluxe Έκδοση Πορτοκαλί Αρσενικό Στυλ Μοντέλο Κούκλας Συλλεκτικό Παιχνίδι
US$12.69 US$13.99
1
Συστάσεις
Σχόλια (0)
buckeyes1997 02/09/2021
These are great cheaper Arduino modules. They work great with the IDE and no complaints at all with build quality.
Πίνακας ανάπτυξης Geekcreit® ATmega328P Nano V3 Βελτιωμένη έκδοση της πλακέτας ελέγχου
US$9.99 US$25.99
1
Συστάσεις
Σχόλια (0)
Επιτροπή Φορτιστής Μονάδας Φόρτισης Επαναφορτιζόμενων Μπαταριών NiMH NiCd 1-8S 1.2V-9.6V Είσοδος DC 5V
US$6.89 US$10.99

Ερ: Por favor, alguém me responda se a placa do carregador de baterias, Solter , novacar 20 tem disponível para troca. Essa placa mostruário no site, serve?

Ερώτηση από BG403711442 επί 2021-07-15 04:35:39

buckeyes1997 I'm not familiar with that question.

2021-09-02 11:19:31 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
NEJE Κιτ οδήγησης ενός 20W Μονάδας Λέιζερ 450nm Επαγγελματική Συνεχής Κοπής και Γραφής Λέιζερ Φως Μπλε με Modulation TTL / PWM για Λειτουργίες Κοπής / Γραφής με Μηχανή CNC DIY Λέιζερ Συμβατό με Arduino
US$152.45 US$158.99

Ερ: il modulo può essere montato sul laser ortur? ora ho un modula da 7w

Ερώτηση από stefanovecchi επί 2021-09-02 03:29:19

buckeyes1997 I'm not sure as I mounted it on my CNC. If you 3D print a mount it should fit on most machines.

2021-09-02 11:09:40 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
Creality 3D® Ender-3 Linear Rails Όλα τα κιτ για εκτυπωτή Ender-3S / Ender-3 Pro 3D με αισθητήρα στάθμης
US$166.31 US$172.99

Ερ: will it fit to ender 3 v2?

Ερώτηση από BG483713441 επί 2021-06-02 07:44:05

buckeyes1997 it does fit but the hotend plastic housing doesn't fit the included mount and needs modified. Also some of the 8mm screws should be 6mm to mount the bearings properly. It does work but not perfect. Also the belt alignment on the X is a problem depending on how you mount the hot end.

2021-09-02 11:08:30 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (1)
buckeyes1997 09/08/2021
These work great and really speed up project wiring. I use them for outlets, and electronic projects that normally require soldering wires.
10 τεμ. Ελατήριο έγχυσης επαναχρησιμοποιούμενου καλωδίου με 2-σύρματα πόλου, μονωτικό υλικό
US$6.92 US$7.99
1
Συστάσεις
Σχόλια (0)
buckeyes1997 28/10/2020
this laser works very well. the optical lens is not the best at focusing the laser but after market mods work better.
NEJE Κιτ οδήγησης ενός 20W Μονάδας Λέιζερ 450nm Επαγγελματική Συνεχής Κοπής και Γραφής Λέιζερ Φως Μπλε με Modulation TTL / PWM για Λειτουργίες Κοπής / Γραφής με Μηχανή CNC DIY Λέιζερ Συμβατό με Arduino
US$152.45 US$158.99
3
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe