Αντώνης Παπαδόπουλος
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

Αντώνης Παπαδόπουλος 26/08/2022
great kit, especially for the money. I bandaid modded the stabilizers, lubed them well and used tape mod+foam+ o ring mount and it sounds amazing.
Ολοκληρωμένος μηχανικός συνδυαστής πληκτρολογίου FEKER JJK84 84 πλήκτρων με δυνατότητα αλλαγής λειτουργιών σε τρία μεγέθη με 3/5 ακίδων συνδέσμους μέσω Type-C/Bluetooth/2.4G, επίσης με σετ μπαταριών sandwich pad, καθώς και με τα πλήκτρα Holy Panda Gateron.
US$39.99 US$44.99
1
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 03/08/2022
The screen isn't bad, but it isn't great either. The true bezels are quite a bit more recessed than they seem, as the screen has an internal border of +5 mm. Overall, colors are decent, and build quality is perfectly acceptable. the control buttons are a bit uncomfortable, and the menu is in Chinese(I think), with no indication as to how it changes. Packaging was amazing though.
Οθόνη XIAOMI 24,5 ιντσών IPS 165 Hz G-SYNC Γρήγορη LCD 2ms GTG 400cd/㎡ 100% sRGB ευρυγώνιο έγχρωμο HDR 400 Υποστήριξη Super-Thin Body Home Office Οθόνη παιχνιδιών υπολογιστή στο σ
US$464.99 US$743.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 28/07/2021
I just received the filament. I really appreciate the fact it came in a nice cardboard box, and sealed in a thick plastic bag with silica gel in it to remove moisture. I ordered it in red color, the shade of red is pretty good, although the filament is really shiny. Flexibility and stretchyness is at the expected level for tpu, I'll run a test print and update the review with printing performance.
SUNLU TPU 1.75MM Νήμα 0,5KG 1 Roll 11 Χρώμα Διαθέσιμο νήμα υψηλής αντοχής για εκτυπωτή 3D
US$25.99 US$32.99
0
Συστάσεις
Σχόλια (2)

Αντώνης Παπαδόπουλος it prints just fine, strongly hydroscopic though, it needs to be stored somewhere really dry

Αντώνης Παπαδόπουλος 28/07/2021
I just received the filament. I really appreciate the fact it came in a nice cardboard box, and sealed in a thick plastic bag with silica gel in it to remove moisture. I ordered it in red color, the shade of red is pretty good, although the filament is really shiny. Flexibility and stretchyness is at the expected level for tpu, I'll run a test print and update the review with printing performance.
SUNLU TPU 1.75MM Νήμα 0,5KG 1 Roll 11 Χρώμα Διαθέσιμο νήμα υψηλής αντοχής για εκτυπωτή 3D
US$25.99 US$32.99
0
Σχόλια (2)
Αντώνης Παπαδόπουλος 03/08/2022
This particular hotend is very well made, all parts were nicely finished, and tolerances look pretty great. Is it as good as the original copperhead? most likely no. However, just by looking at it, this one should perform relatively well
Κόκκινο Μονάδα της Θερμαντικής Κεφαλής Red Lizard V5 Pro V6 με διπλή μεταλλική θερμομόνωση,χαλκοκατάσταση Καυτής Κεφαλής για CR-10 CR10S Ender-3 V2 Ender-3 Μέρη Εκτυπωτή 3D
US$39.99 US$49.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 07/06/2022
This is a really well made heartbreak, good tolerances and finishing that result in great print quality. If you use an ender 3 and want to properly print ABS or other hotter plastics, it's an essential upgrade.
Θερμοκρασία BIGTREETECH® Bi-metal Copper Titanium Alloy V6 εξαερωτή ψιλοθροας από χαλκό και τιτάνιο ασημί V6 έκδοση πουλκανού για PT100 V6 θερμοκρασία Prusa i3 MK3 εκτυπωτή 3D
US$10.96 US$9.49
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 01/01/2022
It has been some time since I bought these stabilizers, and I just tested them today. They clip onto the plate very steadily, and they can be easily removed by pressing the handy little tab on each stab. I put 4 stars as they do not come pre-lubed and the color combination isn't that good.
Feker PCB Cherry OEM Stabilizer Holy Panda Colour 6.25U 2U Plate Mounted Satellite Switch Stabilizer for Mechanical Keyboard Modifier Keys
US$10.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 30/11/2021
Great chair, for the price at least. It's relatively well made, looks really good too. My only complaint is that the chair arms are non-adjustable and need tightening once in a while for them to not wobble.
BlitzWolf® BW-GC1 Gaming Chair Ergonomic Design 150°Reclining Detachable Pillows Footrest Integrated Armrest Home Office
US$159.99 US$209.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 27/10/2021
The screwdriver is well made for the price, overall very good-looking but the edges of the aluminum housing are a bit sharper than I'd like them to be, nothing that can't be solved with some sandpaper though. torque is decent for such a small and compact tool. Very fast shipping, too, something Banggood excels at lately.
Κατσαβίδι Wowstick 1P+ 19 σε 1 Ηλεκτρικό Κορδονέζικο Εξαρτήματος Εργαλεία Επισκευής
US$25.29 US$39.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 27/10/2021
Great propellers for the price, very rigid and well made. Also really good looking, not a single mark or blemish on any of the sets
6Pairs iFlight 5140 NAZGUL Ανθεκτικό 5 ιντσών Prop 3-Bed Προπέλα For Nazgul5
US$10.38 US$14.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 22/10/2021
Excellent product, nice and thick glass. At first I was worried that the coating might peel off, but it seems to be pretty durable. Very good looking, plus it was shipped very fast and well protected
Creality 3D® Ultrabase 235 * 235 * 3mm Glass Plate Platform Heated Bed Build Surface for Ender-3 MK2 MK3 Hot bed 3D Printer Part
US$25.40 US$27.00
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 03/10/2021
Overall a great frame, fully equipped with fasteners and anything you might need. It definitely looks more well made than the sample pictures, plus it was shipped extremely quickly to me
Το πλαίσιο URUAV Cost-E 6K με βάση τροχού 5 ιντσών και μήκος 210mm ταιριάζει για το RC FPV Racing Drone σας.
US$27.71 US$28.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 22/09/2021
Speed controller seems well made, under close examination all solder joints seem to be high quality, PCB is clean and well cut. In the package there is a set of high gauge wires that look well made, and a pretty big capacitor. also an XT60 plug with a rear cover to protect the solder joints. Just a warning, wires don't come pre-soldered to the PCB or plug, but this shouldn't really be a problem anyways. Lastly, the connector to the flight controller is provided with reasonably long wires. My only complaint is that there is only a plug for the ESC side, on the flight controller side there are just bare pre soldered wire ends that either need soldering or an extra plug. Overall really good value for money
30.5 * 30.5mm Racerstar Air50 3-6S 50A 4In1 ESC Ενσωματωμένος τρέχων αισθητήρας BLheli_S DShot600 Συμβατό με AirF7 Lite
US$37.79 US$40.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 20/08/2021
the cable seems to be exactly as it should be
Γνήσια αντικατάσταση αξεσουάρ επισκευής καλωδίων Flex Cable Flex 3-σε-1 Gimbal για DJI Mavic Mini RC Drone
US$25.19 US$19.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 17/08/2021
The motors are really high quality, they look exactly as pictured. They have nice, long pre-tinned wires and they even have a nice aluminum guide extending from the mounting plate that keeps the wires from grinding against the rotor. The package also includes screws for mounting, as well as a nut. Only thing that kinda annoys me is that the motors were individually packaged in small boxes, and they were all wrapped in this awful tape that made the boxes sticky
4 τεμάχια Αισθητήρας αέρος Racerstar AirC 2207.5 1850KV 4-6S NextGen Unibell Brushless για αγώνες drone RC FPV
US$86.61 US$89.99
0
Συστάσεις
Σχόλια (0)
Αντώνης Παπαδόπουλος 28/07/2021
I received the product a few days ago and I finally got the chance to test it. I have to say I am pleasantly surprised, as this is a fine set of picks, one that I really enjoyed using. The included rubber handles are relatively comfortable, although they do prevent the picks from easily fitting in the strap. the case they come in is also pretty, functional and well made. Only thing I'd like to see is a variation in the thickness of the picks.
Σετ εργαλείων ανοίγματος κλειδαριών DANIU 12 τεμαχίων, διάφορα διαφανή κλειδαριές συνδυασμού, σετ εργαλείων κλειδαρά
US$27.71 US$25.99
0
Συστάσεις
Σχόλια (0)
Σετ εργαλείων ανοίγματος κλειδαριών DANIU 12 τεμαχίων, διάφορα διαφανή κλειδαριές συνδυασμού, σετ εργαλείων κλειδαρά
US$27.71 US$25.99

Ερ: What millimeter of thickness is the lock pick?

Ερώτηση από KimJinBong επί 2018-11-01 05:24:21

Αντώνης Παπαδόπουλος it's inbetween 0.7 and 0.8 mm, all picks are the same thickness

2021-07-28 08:48:09 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (5)
Αντώνης Παπαδόπουλος 19/07/2021
it's a very nice little antenna, the quality of it seems to be good and shipping was impressively fast
1τμχ./2τμχ./4τμχ./10τμχ. Πτηνοένα 5,8G 8dBi RHCP Κεραία FPV Αρσενικό RP-SMA Μαύρη
US$8.07 US$14.39
0
Συστάσεις
Σχόλια (0)
Eachine US65 DE65 PRO 65mm 1-2S Brushless Whoop FPV Racing Drone BNF CrazybeeX F4 FC CADDX ANT Cam 0802 14000KV Μοτέρ
US$125.99 US$134.99

Ερ: What is the difference??: Version: Lila-neu / Long Sleeve~White 01

Ερώτηση από BG160415615 επί 2020-11-12 05:20:36

Αντώνης Παπαδόπουλος it's the exact same drone, just with a different pattern on the top

2021-07-16 02:45:32 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (4)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe