Όλα τα μηνύματα

Lucifer Buy one and measure it. If you can't afford to buy one to find out then you can't afford to start a business.

2023-03-03 10:06:45 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: Quisiera saber O q m expliquen q es envió desde CN?

Ερώτηση από BG523754224 επί 2020-04-27 04:21:24

Lucifer Sent from CN means it's sent directly from the Chinese manufacturer.

2022-11-17 12:42:14 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Can the output power be turned down?

Ερώτηση από Lucifer επί 2022-10-03 02:02:36

chinatronic I did not find an option that would allow to throttle the performance. However, the performance of these devices is usually stated much too high. An example is a device that is advertised with 8 watts Effectively, 3 possible transmitters frequency ranges 5+2+1 = 8 watts were added together

2022-10-23 03:11:33 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (1)

Ερ: it's written that it can go 100km/h in the description, how can you unlock that ?

Ερώτηση από BG453217153 επί 2022-08-29 10:17:05

Lucifer Top speed is limited by voltage. 48v battery is about 40-50kph. 60v battery is about 50-60kph. 72v battery is about 70-80. 84v battery is about 80-100kph. If the controller can't handle more than 60v then you're limited to about 60kph.

2022-09-07 07:37:10 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: CAN IT FIT FOR DATSUN GO PLUS 2018 MODEL

Ερώτηση από Julian επί 2018-09-28 03:56:12

BG453716393 It would fit all 12v vehicles.

2022-04-23 09:53:12 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

BG453716393 Both will accelerate at roughly the same rate but the 48v will have a higher maximum speed. But this is also dependent on the batteries being able to supply enough amps.

2021-12-07 01:59:13 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (4)

BG453716393 You shouldn't have to change any capacitors, a car battery should provide enough current for 0.2mm. Just keep the battery cables short and use thick cables like jumper leads to connect to the battery. The 8mm width changes nothing - they can be 800mm and it'll still work the same. This is a spot welder so it welds a small dot where you hold the two probes against the nickel strips.

2021-10-09 04:56:21 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (1)