uslakar
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

uslakar 20/06/2020
Ferrules are ok. Shipment was relatively fast.
Aemedy® 2120 τεμαχίων μονωμένων ακροδέκτες επικαλυμμένου χαλκού για κέρμα περικοπής τελειών οροφής σετ για 22-5AWG
US$15.00 US$15.84
0
Συστάσεις
Σχόλια (0)
uslakar 21/11/2019
This is a very good soldering station concept, that is executed criminally poorly. I read of other people's problems with this product and I definitaly expected my share of them. And I got them alright. The biggest problem was, that the knob was not mounted straight. It was so bent, that the pushbutton did not work. And upon picking the station apart I found, that this was not because of bad packing or postage mishandling, it was bad manufacturing. The whole controller/lcd/pcb compositure was put together out of tolerances. So what I did was, I picjked it apart and drilled 2mm wider hole for the knob. Once I did this, the knob had enough space to sit straight. And the pushbutton function also started working. So dear manufacturer, I understand that you employ poorly paid unskilled labourers that don't have a clue, but to avoid bad manufacturing, just increase the drill radius for the knob/potentiometer!!! One of the heatsinks on the power supply board was raised 2mm on one side. This is to avoid heatsink touching the lead on the surface of the pcb. I left it like that, since it's ok. And I desoldered the other and put two washers under it. I also added grounding to the station case, since I don't want to get electrocuted. One last flaw that is still remaining is the station not responding to shaking of the handle (doesn't get out of stby). The settings are ok, so what I will have to look for is either a cold joint or soldering handle pinout improperly wired. Does anyone have the proper handle connector pinout? Thanks.
Ψηφιακός ελεγκτής θερμοκρασίας V2.1S T12 Σταθμός κόλλησης Ηλεκτρικό σίδερο κόλλησης Συμβουλές T12-K + Χειριστήριο 907
US$51.99 US$76.99
2
Συστάσεις
Σχόλια (2)
Αντιστατική θερμομόνωση πλατφόρμα σιλικόνης 34 * 23CM με βίδα
US$12.69 US$19.99

Ερ: Can you specify the conductivity of the pad. Also, is there provision for an earthing point or wrist strap?

Ερώτηση από tonydg02 επί 2019-01-09 07:05:00

uslakar So the manuafacturer and the seller are in fact lying about the anti-satatic part? Because the official Item name is "Anti Static Heat Insulation".

2019-12-03 03:00:48 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (3)

uslakar Itmeans the white and blue wires in the plug have been swapped over! 1=Blue, 2=White, 3=Green, 4=Black, 5=Red - THIS IS CORRECT WIRING.

uslakar 21/11/2019
This is a very good soldering station concept, that is executed criminally poorly. I read of other people's problems with this product and I definitaly expected my share of them. And I got them alright. The biggest problem was, that the knob was not mounted straight. It was so bent, that the pushbutton did not work. And upon picking the station apart I found, that this was not because of bad packing or postage mishandling, it was bad manufacturing. The whole controller/lcd/pcb compositure was put together out of tolerances. So what I did was, I picjked it apart and drilled 2mm wider hole for the knob. Once I did this, the knob had enough space to sit straight. And the pushbutton function also started working. So dear manufacturer, I understand that you employ poorly paid unskilled labourers that don't have a clue, but to avoid bad manufacturing, just increase the drill radius for the knob/potentiometer!!! One of the heatsinks on the power supply board was raised 2mm on one side. This is to avoid heatsink touching the lead on the surface of the pcb. I left it like that, since it's ok. And I desoldered the other and put two washers under it. I also added grounding to the station case, since I don't want to get electrocuted. One last flaw that is still remaining is the station not responding to shaking of the handle (doesn't get out of stby). The settings are ok, so what I will have to look for is either a cold joint or soldering handle pinout improperly wired. Does anyone have the proper handle connector pinout? Thanks.
Ψηφιακός ελεγκτής θερμοκρασίας V2.1S T12 Σταθμός κόλλησης Ηλεκτρικό σίδερο κόλλησης Συμβουλές T12-K + Χειριστήριο 907
US$51.99 US$76.99
2
Σχόλια (2)
Ψηφιακός ελεγκτής θερμοκρασίας V2.1S T12 Σταθμός κόλλησης Ηλεκτρικό σίδερο κόλλησης Συμβουλές T12-K + Χειριστήριο 907
US$51.99 US$76.99

Ερ: I received it and power on but the screen display ERROR. What is wrong?

Ερώτηση από Hankil επί 2019-08-17 03:11:50

uslakar Make sure the soldering tip is properly inserted. Twist it gently while inserting to reach complete contact.

2019-11-21 04:02:06 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (4)
Ψηφιακός ελεγκτής θερμοκρασίας V2.1S T12 Σταθμός κόλλησης Ηλεκτρικό σίδερο κόλλησης Συμβουλές T12-K + Χειριστήριο 907
US$51.99 US$76.99

Ερ: is the case metal or plastic.

Ερώτηση από keith.lovett88 επί 2019-09-18 09:51:39

uslakar soldering handle case = plastic station case = metal!

2019-11-21 03:56:40 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)
uslakar 21/11/2019
Good, works, cheap. Of course, Hakko original is better, but costs more...
T12-D24 Αντικαταστήστε την Κολλητική Μύτη Σιδήρου
US$10.38 US$10.99
0
Συστάσεις
Σχόλια (0)
uslakar 21/11/2019
Sturdy, heavy as it should be, stable. T12 soldering handle fits nicely. you can remove circular foam and inser this solder cleaner: https://www.banggood.com/CMT-Stainless-Steel-Welding-Soldering-Solder-Iron-Tip-Cleaner-Gold-Cleaning-Wire-p-978405.html
Βάση συγκόλλησης με βάση συγκολλητικού σιδήρου για τη λαβή του σταθμού συγκόλλησης FX951 T12
US$23.09 US$23.99
0
Συστάσεις
Σχόλια (0)
uslakar 21/11/2019
The plug comes smaller than standard size, but fits into the socket. Also wire thickness is only appropriate for low power appliances. And it's relatively cheap...
Καλώδιο καλύμματος τροφοδοσίας AC 1,2μ Καλώδιο σύνδεσης τροφοδοσίας AC Ευρωπαϊκό/ Αμερικανικό/ Βρετανικό βύσμα
US$4.99 US$8.38
0
Συστάσεις
Σχόλια (0)
uslakar 21/11/2019
The wire container is good and looks nice. The cleaning wire is not so good, i've seen better. The wire container fits into this soldering iron stand: https://www.banggood.com/Soldering-Iron-Stand-Welding-Holder-for-FX951-T12-Soldering-Station-Handle-p-1156336.html
Καθαριστής επικαλύμματος σιδηρού μύτης συγκόλλησης CMT χρυσή καθαριστική κλωστή με βάση
US$10.38 US$10.99
0
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe