DanSourmayo
Ερ: what is the maximum current it can handle?
Ερώτηση από Vishal Dhayalan επί 2017-12-08 06:15:27
DanSourmayo I've had no problems at 1.5 amps.
2021-08-20 03:43:08 Βοηθητικός (0)
DanSourmayo Not a direct answer, but I ordered a 2 pin euro adapter to the UK and they supplied a euro to UK adapter. The UK plug is seldom in stock!
2021-08-20 03:38:14 Βοηθητικός (0)Ερ: which is the Amp suported?
Ερώτηση από weisy επί 2019-01-23 09:57:56
DanSourmayo I have used up to 1.5amps without an issue. If you have a bench supply, you could sacrifice one connector and test how many amps it could handle.
2021-08-20 03:35:58 Βοηθητικός (0)Ερ: I am interested in buying two red one and a yellow one how do I go about this
Ερώτηση από BG575445913 επί 2021-08-13 03:09:54
DanSourmayo You can add one colour at a time, and as many of that colour as you want, to your cart. So you can add two red to your cart, then add one yellow to your cart.
2021-08-20 03:32:38 Βοηθητικός (0)Ερ: Is there soft rubber tyres in each car instead of foam tyres ?
Ερώτηση από BG644127836 επί 2021-03-30 08:37:28
DanSourmayo There is not an option for rubber tyres, though some other models do have rubber tyres.
2021-08-20 03:31:24 Βοηθητικός (0)
DanSourmayo You could solder a small resistor or potentiometer between the motor and board. You'd want to start by figuring out the number of volts the motor uses and calculate what resistance you should need to drop the voltage slightly.
2021-08-20 03:30:21 Βοηθητικός (0)
Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!
Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.
Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
DanSourmayo I don't believe so. This isn't the same as the microcontroller on the control board for that engraver. I'd suggest replacing the entire control board, as you'd have to find the correct microcontroller and find and flash the correct (potentially proprietary) software onto it.
2022-02-10 12:52:30 Βοηθητικός (0)