MattUs
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

MattUs 13/02/2020
HJS 1000W Τροφοδοτικό αλλαγής ισχύος SMPS AC 110/220V σε DC 0-12/24/36/48V με διπλή ψηφιακή οθόνη LCD
US$147.06 US$161.99
1
Συστάσεις
Σχόλια (0)
MattUs 16/01/2020
So far I am very happy with this.The adjust-ability of voltage and current make this power supply far more versatile than the common fixed value ones. I bought the 12V 70 amp version and I use mine mainly for a fast automotive charger. the voltage limiting protects the cars electronics from over volt. current limiting lets me do trickle charge. you can also use this to charge lithium batteries, (but verify your settings first to prevent over charging!) I just tested it and it works just as I expected. (Warning be careful if using on 220V!) the label on mine was backwards and at 220V it will likely damage the unit if in the wrong position. make sure to look at the markings on the switch it self! not the label and all should be good. The voltage on mine has full adjust-ability from 0.0V to about 16.2V and the multi-turn pots let you set with accuracy. mine was able to deliver almost 75 amps, but I don't recommend exceeding the rated 70 for more than a brief moment. that's a lot of amperage for such a small package.
HJS 1000W Τροφοδοτικό αλλαγής ισχύος SMPS AC 110/220V σε DC 0-12/24/36/48V με διπλή ψηφιακή οθόνη LCD
US$147.06 US$161.99
1
Συστάσεις
Σχόλια (1)
MattUs 02/04/2020
As others have mentioned the grind quality is very good if not excellent. I think the official photos on the Banggood listing may be old stock as the set I received actually looks much beater than the official photos. Ill try to upload a closeup of the set I received. So far I have used a few of these in both mild and high grade frame steel and the performed very well. on par with my fractional inch set of Milwaukee cobalt bits which cost way more for about half as many bits. Note they do not come with a case. however if you have a 3d printer, I designed one specifically for this set and posted the files on thingverse; thing # 4251707 https://www.thingiverse.com/thing:4251707
Drillpro 25pcs 1-13mm HSS M35 Cobalt Περιστρεφόμενο τρυπάνι Bit Set for Metal Wood Drilling
US$46.19 US$50.99
5
Συστάσεις
Σχόλια (2)
MattUs 02/04/2020
Like Piranhas for your mill! These things cut fantastic even in high grade frame steel. good geometry and very hard.
Φρέζες μύλου καρβιδίου τουγκστέν με 4 σφυρήλατα κοπής 1-10mm HRC65,επικαλυμμένες με μπλε στρώση NACO,εργαλείο CNC
US$10.34 US$10.99
1
Συστάσεις
Σχόλια (0)
MattUs 13/08/2020
These are my most commonly used carbide. The blue nano cuts better and lasts longer than other coatings; especially in hardened steels.
Εισαγωγή καρβιδίου CNMG120408-MA US735 Μπλε Nano HRC45 από την Drillpro, 10 τεμάχια, για την κράτηση του εργαλείου τόρνου MCLNR/L
US$26.55 US$27.99
1
Συστάσεις
Σχόλια (0)
MattUs 22/09/2020
these cut very well!
Drillpro 10pcs HRC45 Μπλε Νάνο MGMN200-G 2mm Καρβίδιο Insert for MGEHR / MGIVR Turning Tool Holder
US$20.78 US$21.99
0
Συστάσεις
Σχόλια (0)
MattUs 22/09/2020
Only used a few times so far, but with the blue nano inserts I bought for it here as well, it cuts much better than my HSS parting tool. the inserts have a relief formed in them which prevents most of the jamming of chips along the sides. the tool holds the insert tighter than I expected; it is not likely to come out under normal usage.
Κάτοχος εργαλείου γυρίσματος MGEHR2020-2 20x125mm Τόρνος Κοπή τεμαχισμού Τακτικές MGMN200 Inserts
US$20.78 US$21.99
0
Συστάσεις
Σχόλια (0)
MattUs 30/07/2020
Well made tool and works as expected. Note I had to turn a section of the shank down to 20mm to fit the largest of my ER32 collets I use in my mill; no surprise , I knew that before buying.
300R C25-25-150 Milling Tool Holder Lathe CNC Arbor For APMT1135 Insert
US$22.89 US$23.99
0
Συστάσεις
Σχόλια (0)
20mm 60 Βαθμός HSS Dovetail Milling Cutter Straight Shank Woodworking Milling Cutter
US$11.56 US$13.99

Ερ: shank size?

Ερώτηση από BG674810352 επί 2020-06-05 04:42:11

MattUs 12mm

2020-06-06 03:00:47 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (3)
Τρυπάνι Drillpro 400R 80mm 6 Λεπίδων Επαφής MT2 Πλευρά Πιστολέτου FMB27 με 6 Εισαγωγές Καρβιδίου APMT1604
US$75.63 US$69.76

Ερ: does center bore in arbor go all the way through? I have unusual setup where draw is tightened through arbor from bottom. I am currently using this setup for milling with a mt2 to er32 adapter arbor. Now that I have received this I can answer this my self. With the head retaining bolt removed, the bore does in fact go all the way through. I will use this the same as my MT2 to ER32 adapter, with a custom insert threaded in the draw bar threads and a smaller diameter bolt pulling up through a hole in the center of the insert. the small bolt then threads in to a cross bar in the MT2 knock out port.

Ερώτηση από MattUs επί 2019-12-16 11:35:33

Happypear good

2020-01-06 01:11:59 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
MattUs 02/04/2020
Its no bench scope, but for under$70 US it is a a surprisingly handy and capable field scope, so long as you understand its limitations. It is particularly useful when you need measure with an isolated ground. The battery seems to give good run time and the display is clear and sharp for its size. the on screen menus are laid out well and easy to use. the automated frequency readout, as apposed to the actual graph, seems a little fussy about the wave form to me, but other than that it does what I expect. The case provides good protection, but should have been about 10mm taller to better accommodate the probe; it fits, but the strain relief gets bent quite sharply. I noticed that some people were complaining about scratches, so I am mentioning that there is a screen protector film on it from the factory, but it is hard to see the edge and realize that it is there; try picking at the corner even if you don't see it.
DANIU ADS5012H Ψηφιακή οθόνη 2,4 ιντσών TFT Anti-Burn Oscilloscope 500MS / s Ρυθμός δειγματοληψίας 100MHz Αναλογική ζώνη εύρους ζώνης Υποστήριξη Αποθήκευση κυματομο
US$118.64 US$119.99
1
Συστάσεις
Σχόλια (0)
MattUs 18/05/2020
They seem to cut well! I have used 2 sizes in hardened tool steel so far and both performed very well.
Σετ 8 τεμαχίων μπλε Naco 2-12mm 4 χαρακτήρες από καρβίδιο μυτερών μύλων της Drillpro HRC50 Tungsten Steel Άλεση Cutter Tool
US$37.99 US$55.99
0
Συστάσεις
Σχόλια (0)
MattUs 10/05/2020
I ordered the MT2 version and the fit and finish is good.
Κάτοχος στεγανών κεφαλών MT2 MT3 R8 για τον φορτίο του τόρνου
US$32.33 US$33.99
0
Συστάσεις
Σχόλια (0)
MattUs 10/05/2020
Seems to be solid enough and adjustment moves precisely. holds boring bar good and tight and fit is good with the arbor I bought for it.
Κεφαλή τρυπανιού 50mm για τόρνο φρέζας
US$54.27 US$56.99
0
Συστάσεις
Σχόλια (0)
Drillpro 25pcs 1-13mm HSS M35 Cobalt Περιστρεφόμενο τρυπάνι Bit Set for Metal Wood Drilling
US$46.19 US$50.99

Ερ: Can you supply this set of drill bits in a steel case similar to the HSS set shown

Ερώτηση από Bob επί 2018-11-09 07:59:06

MattUs If you have a 3D printer, try this... thingiverse #4251707

2020-04-02 11:52:09 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (3)
0-0,8 0,01 Μετρητής δοκιμαστικής στροφείου ακριβείας μετρητή φορητής κλίμακας μέτρου εργαλείου
US$30.02 US$31.99

Ερ: It`s shockproof ??

Ερώτηση από edeko επί 2020-02-29 05:37:37

MattUs Idon't know for sure but I doubt it. .This is a mechanical high precision measuring instrument. I would expect any device like this to strip under a shock load; not a flaw, just the nature of that much multiplication of movement against the tiny gears that drive the needle.

2020-03-02 09:21:19 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
MattUs 28/02/2020
Its a good switch for light industrial applications. I use this as a disconnect for the VFD, DRO and other electronics on my mill conversion. The wiring space is a bit cramped, but that is to be expected in such a compact unit. The housing is a fairly thick and rugged plastic and it is easy to mount with 2 screws under the lid.
3,7KW 30A Διακόπτης κουμπιού τροφοδοσίας Στιγμιαίος διακόπτης
US$8.15 US$15.98
0
Συστάσεις
Σχόλια (0)

MattUs it's been several days and banggood hasn't posted my video review yet, so here is the address if you want to check it out. https://youtu.be/CQRFiM6TXOk

MattUs 16/01/2020
So far I am very happy with this.The adjust-ability of voltage and current make this power supply far more versatile than the common fixed value ones. I bought the 12V 70 amp version and I use mine mainly for a fast automotive charger. the voltage limiting protects the cars electronics from over volt. current limiting lets me do trickle charge. you can also use this to charge lithium batteries, (but verify your settings first to prevent over charging!) I just tested it and it works just as I expected. (Warning be careful if using on 220V!) the label on mine was backwards and at 220V it will likely damage the unit if in the wrong position. make sure to look at the markings on the switch it self! not the label and all should be good. The voltage on mine has full adjust-ability from 0.0V to about 16.2V and the multi-turn pots let you set with accuracy. mine was able to deliver almost 75 amps, but I don't recommend exceeding the rated 70 for more than a brief moment. that's a lot of amperage for such a small package.
HJS 1000W Τροφοδοτικό αλλαγής ισχύος SMPS AC 110/220V σε DC 0-12/24/36/48V με διπλή ψηφιακή οθόνη LCD
US$147.06 US$161.99
1
Σχόλια (1)
SRDCN2020K10 Κάδος εργαλείου περιστροφής τόρνου με κλειδί T8 για ένθετο RCMT1003MO
US$16.80 US$18.89

Ερ: What are the correct inserts for this? I bought Blue Nano HRC52 RDMT10T3MOTN NB7010, but the hole is too big and they look to be too tall as well.

Ερώτηση από MattUs επί 2020-01-30 11:32:36

Wharfinger for RCMT1003MO Insert

2020-02-04 03:11:03 Βοηθητικός (2)
υποβάλλουν
Απαντήσεις (1)
MattUs 02/02/2020
After getting one for my self, I liked it so much that I bought another for my Daughter; She is very happy with hers as well! They are very well made. I use mine a lot for past two months, and it is still in great shape.
Θερμαινόμενο γιλέκο με έξυπνη θέρμανση USB που είναι ιδανικό για τον χειμώνα
US$64.39 US$67.99
0
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe