ArtusMuc
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

ArtusMuc 07/06/2018
I have seen this tester some month ago and was not sure to buy or to look for another one. But the other one are more expensive and i have to pay additional custom fees and some hours to go to the custom office. After i have some problems with my self wound motors - i decide to buy this. Some write here there is no description - some write here its not working. I replace the power connection connected to a adjustable step down modul with output 3.8 Volt - and the display shows me a friendly "Hello" after pushing the first button.(if you connect this with 3.3 V - the display shows "LB" think it means "LOW Battery". the second button you can choose the units (gr- lbs-oz and something i dont know) - and the 3. button you can set to 0 (zero). You can see push or pull trust. What to do we need more when we want to now how good a brushless motor is? And test a motor / prop combination :) The weight-sensor is very sensitive - how exact it is - i will try to test. I will now build some adapters for smaller and bigger motors - and hope i will have a happy testing :) The only thing is how is packed. I am glad that is only the alu ground plate is damaged on the corners. And the rest is working - so no reason for craying to customer service. For some of us how are want to know if the trust is ok for hovering your copter - i think its ok to have this item. Combined with a watt-meter and a laser-tachometer you have all what you have to test
Crazy Motor CML-5 Brushless Motor Pull Force Tester Gauge Meter Tester για RC Μοντέλο
US$54.06 US$64.87
2
Συστάσεις
Σχόλια (0)
ArtusMuc 01/09/2020
my first impression was .. after using .. "unusable for EV200D" as we all know .. the original "faceplate .. Stoff schwamm" .. is given up after 2 or 3 week. i have "afterworked" the Orginal .. yes .. some days more .. but the "glue" gives up this .. ok .. tested again .. and ordered again seems to solve the "glue" problem .. but does not fit to every "face" (or example mine) .. but you have not a problem with this original faceplate to loose the glue .. it hold and fit for some month "recommended" in my opinion
Αντικατάσταση καπάκι υφάσματος σφουγγαριού για γυαλιά FPV URUAV για Eachine EV200D
US$7.99 US$16.99
0
Συστάσεις
Σχόλια (0)
Bakeey Full Assembly LCD Display Touch Screen Digitizer Αντικατάσταση με εργαλεία επισκευής για iPhone 6
US$35.03 US$36.99

Ερ: Can you tell me the difference (expect price) to the other iPhone 6 display you have on stock ?

Ερώτηση από ArtusMuc επί 2018-03-07 02:34:58

BG443717490 الطلب ماوصل شي

2020-05-03 01:59:34 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
ArtusMuc 02/02/2020
It's a nice low cost FC but - with DSHOT protocol have a lot of problems INAV since i have tested not able to activate DSHOT protocol BETAFLIGHT with newest BLHEI_S .. JazzMav and JESC - only with 24mhz able
20x20mm Αναβάθμιση Betaflight F4 Noxe V1 Flight Controller AIO OSD 5V 8V BEC w / Βαρόμετρο και Blackbox για RC Drone
US$22.99 US$27.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 26/11/2019
I have now the first time a bad expience with Matek.. i have mounted .. i connect with pc .. no response .. tried 2 times .. ok .. response. i updated firmware - connecting battery .. 2 times ... it works .. ok .. first flight .. ok. Next flight .. after 20 seconds losing control .. FC is not staring any more. Not waiting to write bangoood - i want not wo wait 2 weeks response and 6 weeks delivery i ordered a new one same price 1 week :) After addional 2 hours soldiering .. FC working well :) If you have an well working matek f411 its does it's job well !
Matek System 20x20mm F411-mini Mini F4 Flight Controller AIO OSD BEC and LED Strip for RC Drone
US$28.13 US$31.83
0
Συστάσεις
Σχόλια (0)
ArtusMuc 16/10/2019
I have exchanged the Venus T81 with this caddx cam. The first flight was annoying. Jello .. no clean picture. I am looking for vibrations - and found a lot - and after i have less vibration on may quad i have an astonishing good picture. The colour's are amazing and this cam like red :). This Cam is a 3.2gr light and very small. All what you need is a cam mount to fix this part on your UAV. Fix your vibrations .. balance your motors and prop's than you will have a good picture and detailed picture on your googles.
Caddx Turbo EOS2 1200τηλεόρασηL 2.1mm 160 Degree 1/3 CMOS 16: 9 Mini FPV Camera NTSC / PAL για RC Drone
US$19.79 US$26.39
0
Συστάσεις
Σχόλια (0)

ArtusMuc thank you for your comment - which target do you use with INAV ?

SeanTheITGuy 03/07/2019
This is probably the best price to performance you'll see in a F4 20x20 flight controller. Unlike the Revobee32, they are very stable under vibration caused by 6000kv+ motors and do not require soft mounting to function. The easy cabling plug is socket and pin compatible with the HAKRC 4in1 15A ESC, making them a very useful pairing for a small brushless quad. Fully supported by Betaflight and iNav. This FC and the HAKRC 4in1 15A ESC have M2 mounting holes. Keep that in mind if you on'y have M3 stack building hardware.
20x20mm Αναβάθμιση Betaflight F4 Noxe V1 Flight Controller AIO OSD 5V 8V BEC w / Βαρόμετρο και Blackbox για RC Drone
US$22.99 US$27.99
6
Σχόλια (1)
ArtusMuc 10/04/2019
sehen gut aus .. hab sie allerdings noch nicht getestet. Die original weller haben die die Bezeichnung lesbar im runden teil. Diese nicht ..
Συμβουλές 10Pcs για κολλητήρι για Weller WSD81 WSP80 WD1000 WP80 LT
US$18.69 US$20.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 10/04/2019
hab ich das auch hier gekauft .. ?? :))
Συνδέστε τους αρσενικούς και θηλυκούς συνδέσμους XT60 500V 30A της Excellway® 20Pcs
US$11.54 US$11.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 10/04/2019
Genau das was ich wollte :)
5Pcs Geekcreit® Red Led 0.28 Inch 2.5V-30V Mini Digital Volt Meter Voltage Tester Voltmeter
US$11.49 US$18.59
0
Συστάσεις
Σχόλια (0)
ArtusMuc 10/04/2019
in Deutsch.... passt !
Κόκκινο LED DC 12V Ψηφιακό θερμοστοιχείο θερμόμετρο Μετρητής θερμοκρασίας 0 ~ 999 ° C με Probe
US$25.40 US$26.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 25/09/2018
i have waiting a very long time from the first announcement of this item to today - and i am statisfied now :) Paid in August - shipped out at the date they promised - and reached me within 13 days - without paying any additions fees :) My first test was no very ok - cause i need + diopter lenses - and i have none. Today i make my lenses by myself (costs 2 Euro) - and now i am happy. I have a clear sharp picture, bright colours. Even the my sepecial "recieve" test - indoor - has the best result i ever have seen I think its a good choice an i am glad to have such a "google" now
Γυαλιά FPV Eachine EV200D 1280*720 5.8G 72CH True Diversity με HD είσοδο 2D/3D και ενσωματωμένο DVR με θήκη μπαταρίας 18650 για RC Drone
US$348.59 US$385.19
0
Συστάσεις
Σχόλια (1)
HGLRC F4 V6PRO Flight Controller 5.8G 48CH 0/25/100/200/400/600mW VTX Raceband 5V BEC PDB OSD
US$57.49 US$59.99

Ερ: What a let down, we were hoping for an f7. doesnt look like they did much except for moving the esc power pads which most people wont use because of 4 in 1 esc and changing the signal pads from wholes to actual pads. Give us and f7 v7 next time and make some 1.3ghz vtx as long range has become a big deal now a days

Ερώτηση από Bonemyster επί 2018-04-19 01:16:02

ArtusMuc Sure - a nice FC - but there is no Full UART3 (only an RX3 pad) - in this case you have no I2C on this board for possible baro and mag. I2C bus is shared on TX3/RX3 with omnibusf4 target.

2018-04-26 05:11:59 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
ArtusMuc 18/04/2018
i have tested one of this VTX - and i am happy to have it. i ordered a second one :))
Mini VTX5848 48CH 5.8G 25/100 / 200mW Διακόπτης FPV RC Drone VTX Video Transmitter Module OSD Control
US$18.47 US$22.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 18/04/2018
Nice 4-LED's Stip with WS2812 programming with 3mm mounting holes. If you want the connect another one - solder the data-wire to the directly to the pin of the LED next to printed 1.
Everyine Aurora 90 100 Mini FPV Racer RC Drone Spare Part WS2812 LED Board LED Light Light
US$8.07 US$8.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 11/04/2018
first i used the cheap cams and changes the objectives. Than i found this one and im flying since one week and i am satisfied with the result. You can fly day & night :). Only modifying this cam is a litte difficult. Not easy to change the objective cause there is a lot of hard glue. it's an M7 Lens. If one of the cable is broken - take a solder iron and remove carefully the black glue - than you are able to solder a new one. The dynamic range is much better in comparison of the cheaper ones - and you see in the night with less light all details for your fpv flight.
FuriousFPV Micro 600TVL 1/4 CMOS 120 Degree FPV Camera 1.9g 14*14mm For RC Drone
US$9.90
1
Συστάσεις
Σχόλια (0)
ArtusMuc 11/04/2018
I bought one - but don't really need at this moment. After some month I'm seeking cause i want to build a small x-type quadcopter with a 30x30 mm board and now i am glad to have cause i am not able to connect USB without this module.
L Type Right Angle Micro USB Transfer Module For RC Flight Controller Male To Female RC Drone FPV Racing
US$2.39
0
Συστάσεις
Σχόλια (0)
ArtusMuc 30/03/2018
This reciever is 30% as big as an x4rsb and has (if you don't really need PWM Channels) around with SBUS the same possibility as the X4RSB. Solderpad for uninverted SBUS and uninverted S.Port. For me one of the best choice for a telemetry reciever.
Δέκτης ανελκυστήρα FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy 1.5g για RC Multirotor FPV Racing Drone
US$33.34 US$45.99
0
Συστάσεις
Σχόλια (0)
ArtusMuc 30/03/2018
i fixed this cooling cap on every VTX Transmitter i have - for example to the HGLRC F4 V5 Board. i think it helps a lot to protect this board. 100 flights now without having any problem.
2PCS 25*18*5mm Aluminum Heat Sink for FPV Transmitter
US$2.55
0
Συστάσεις
Σχόλια (0)
ArtusMuc 30/03/2018
This part is nice for DEVIATION users - which have FRSKY reciever - but not a FRSKY Transmitter and want to change for example X-Recievers to the new f.port protocol. This product is absolutely fine - and would have 5 Stars in all categories - but without any documentation you can do one thing important step wrong. There is no document or an "HOW To" anywhere to find - you have to do this analog the FUC-3 Stick 1) let your system install the drivers and have a look if this is recognized as "COMX" (X is a number) 2) restart your system 3) Download and unzip the software found on FRSKY Website - ACCESSORIES- USB to S.PORT 4) Download the firmware you need for you X-Reciever 5) Plug in the stick (Important - don't connect the reciever yet) 6) start the Frsky Software 7) choose the correct COM-Port 8) load the firmware-file (after loaded the system is searching the reciever) 9) plug the reciever to the stick now (IMPORTANT - NOW!!) 10) the reciever will be found and displayed - click "DOWNLOAD" 11) after a while the reciever is flashed and then click "END" the program will be closed If you plug in the stick with a connected reciever - thats an fault ! The system will not find anything. Have a lot of fun with an updated frsky reciever or f.port protocol
Αντάπτορας USB σε έξυπνη θύρα Frsky για το RC Drone FPV Racing
US$27.71 US$28.99
0
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe