PNink
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

PNink 16/11/2019
Bought this step drill mainly for the fact that it has 1mm steps - unlike most others that offer 2mm steps. The spiral flutes have one significant drawback: The tool grabs and pulls up the workpiece when breaking through from step to step, like a drill does. Something the straight fluted step drills avoid. Chip evacuation is not likely a problem for working on thin panels so I definitely recommend the straight flute step drills for better control. Other than that the tool is sharp and cuts well.
3-13 χιλιοστά/6-25 χιλιοστά/6-35 χιλιοστά M35 βαθμιδωτό τρυπάνι κοβαλτίου διπλό R 1/4 ίντσας εξάγωνο τρυπάνι
US$9.23 US$9.99
2
Συστάσεις
Σχόλια (0)
PNink 20/08/2020
This tap drill is a solid performer. I mainly use M3 and M4 with a power drill in mild steel and aluminium. Very good chip clearing and stays sharp for very long. Also haven't broken one of these yet - fingers crossed
Τρυπάνι Drillpro M3-M10 HSS Co M35 Μηχανή Sprial Flutes Taps Μετρικό Σπάσιμο Αριστερό Χέρι Νήμα Βύσμα Τρυπάνι Βίδα
US$10.38 US$10.99
0
Συστάσεις
Σχόλια (0)
PNink 15/07/2020
Decent quality but somwhat pricy - you pay for the convenience of a kit. Well packaged to avoid shipping damage
Ψηφιακή θήκη τροφοδοσίας ρεύματος RIDEN® S06A S400 για RD6006 RD6006W Μετατροπέας τάσης Μεταλλική θήκη Δεν περιλαμβάνει τροφοδοτικό
US$52.89 US$83.99
0
Συστάσεις
Σχόλια (0)
PNink 15/07/2020
First impression was that someone must have deburred the face mill with a rock. surface finish was terrible. OK apperance is not everything for a tool. Mounting the inserts I reasised that one of the M4 threads was not well formed - reworked with a tap to make it fit. Final test was to sit the end-mill on a flat surface. It rocked - out by 0.2mm. Meaning the tips of the inserts are not on the same plane, will wear unevenly and leave excessive tool marks on the workpeace. Stopped checking there and contacted Bangood with my concerns. No apparent quality control.
400R-50-22 Face End Mill με MT3-FMB22 Shank και 4pcs APMT1604 ένθετα
US$53.12 US$55.99
0
Συστάσεις
Σχόλια (1)
PNink 15/07/2020
Ok for the price but by no means a precision instrument given the tolerances in the plastic parts, e.g. the scriber was not quite parallel to the base.
Ψηφιακό υψομετρητή 150mm 6'' Κολλήθρα Βερνιέ Μικρόμετρο Ηλεκτρονική μέτρηση
US$41.39 US$35.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
This carbide insert works well in non-ferrous material and soft steel. I chipped a few corners working in stainless steel, but still great value at that price.
Τρυπάνι Drillpro 10 τεμ μυτάκι από καρβίδιο DCMT070204 YBC251 για κάτοχο εργαλείου περιστροφής SDNCN1010H07/SDNCN1212H07
US$10.34 US$10.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
This carbide insert works well in non-ferrous material and soft steel. I chipped a few corners working in stainless steel, but still great value at that price.
Machifit 10 τεμάχια εισαγωγής CCMT060204-HM YBC251 επιστρώνονται με καρβίδιο τιτανίου
US$6.59 US$12.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
handy little set of prototyping PCBs - good quality and inexpensive
Πλακέτα πρωτότυπου PCB με διπλή πλευρά Geekcreit® 40 τεμαχίων FR-4 με διάμετρο 2,54mm
US$9.99 US$15.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
very good machine tap for Aluminium - have not used it in steel as yet
Τρυπάνι Drillpro M3-M10 HSS Co M35 Μηχανή Sprial Flutes Taps Μετρικό Σπάσιμο Αριστερό Χέρι Νήμα Βύσμα Τρυπάνι Βίδα
US$10.38 US$10.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
Have been using these 3 flute end mills with good success in my CNC router on aluminium. Great surface finish at surprising cutting speeds.
Drillpro 1-8mm HRC58 3 Flutes End Mill Cutter Tungsten Carbide CNC Εργαλείο άλεσης για αλουμίνιο
US$6.54 US$6.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
Ground rod was accurate within reason (0.01mm under as far as my micrometer measurements go).good surface finish with some slight marks, probably from transport. Deserves better packaging than only a plastic bag.
6/8/10 / 12mm Διάμετρος Μήκος ράβδου 400mm Ατσάλινος κύλινδρος Γραμμική ράγα Γραμμικός άξονας Οπτικός άξονας
US$13.79 US$14.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
Nice sharp machine tap drill. Works as expected on softer materials like aluminium. Have not tried steel yet.
Τρυπάνι Drillpro M3-M10 HSS Co M35 Μηχανή Sprial Flutes Taps Μετρικό Σπάσιμο Αριστερό Χέρι Νήμα Βύσμα Τρυπάνι Βίδα
US$10.38 US$10.99
0
Συστάσεις
Σχόλια (0)
PNink 16/11/2019
Bought this 3 flute chamfering mill for spot-drilling and chamfering. Was expecting the spot drilling to be smoother than a 2 flute part but there was no significant difference as this tool also rattles a little. Maybe the flutes are not ground even enough? Overall a worthwhile part in the milling toolkit on my small CNC router.
Drillpro 3 Flutes 60 Degree Chamfering Mill AlTiN Coated HRC55 2/3/4/5/6/7 / 8mm Tungsten Steel Milling Cutting
US$11.54 US$19.99
0
Συστάσεις
Σχόλια (0)
PNink 11/11/2018
I bought the N58 ECG watch to replace a sports watch with the added benefit of keeping it on my wrist for the rest of the day. Let's see if this product lives up to the expectations. The good points: Out of the box this watch measures heart rate and even blood pressure with surprising accuracy. Watch bands are quickly exchanged between sport and normal use. Look and feel is pretty good The 'analogue' watch dial is appealing and the wakeup on wrist rotation works well. Here are the things that were letting it down: On closer look the plastic watch case looks cheap. In sports mode (walking) the heart rate was only measured every hour - that is useless but I could not find a way to change it Most screens are taken up by large pictograms instead of making the important parameters bigger and easier to read But here is the show-stopper: This watch needs the WearHeart App on the phone to function. This app is poorly written and conceived. Amongst other annoyances it occupied the BT interface so intensively when the watch was out of range that the in-car hands-free and BT streaming from my phone stopped working! Also the battery consumption from the BT interface was enormous! I had to uninstall this App to get my phone back to normal So overall: Great Hardware let down by a lousy App. The N58 ECG did not live up to my expectations and I feel I wasted my money.
Μπακέι Ν58 ECG EKG Display HR Παρακολούθηση ύπνου 3D UI Multi-sport Fitness Tracker Leather Strap Smart Watch
US$76.18 US$79.99
6
Συστάσεις
Σχόλια (1)
PNink 18/03/2019
Very useful and versatile little relay board - as long as you don't use it to switch 240V mains. The clearances for that are not sufficient, especially between neighbouring relays. Stay safe and use it for voltages below 48V only.
Ενότητα ανεξάρτητων ρελέ 5V 4 καναλιών Geekcreit® για PIC ARM DSP AVR MSP430 Geekcreit για Arduino - προϊόντα που λειτουργούν με επίσημες πλακέτες Arduino
US$4.99 US$9.99
0
Συστάσεις
Σχόλια (0)
PNink 21/07/2019
One of my favourite end mills for machining aluminium with the CNC router. Good finish and performance for a inexpensive cutter.
Drillpro 1-8mm 2 φλάουτα από καρβίδιο βολφραμίου άκρο μύλος κόφτης HRC55 AlTiN Εργαλείο CNC End Mill Coating
US$9.23 US$9.99
0
Συστάσεις
Σχόλια (0)
PNink 18/03/2019
Great alarm clock - love the projection feature and the fact that the display can be dimmed down to no backlight. The USB charger is very useful too. Only room for improvement is that the clock tends to slide around easily especially when the USB cable is used. A rubber foot would be a good addition.
Digoo DG-C10 LCD Wireless USB Rechargeable Backlight Projection Clock Temperature Humidity Display Desk Clock for Phone Pad Speaker
US$21.30 US$25.73
0
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe