BG184817435
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

Richard 10/07/2021
A few years ago I had an earlier model of this plane and it flew OK but had a few issues. This "s" model has several improvements. The canopy is a better fit, attaches more securely, and the front mounting lug has been beefed up with some sort of plastic film. The FPV canopy fits better too and is more cleanly molded. The whole plane is more crisply molded. The wings are a better fit. I ordered 2 extra batteries for the "s" model and although they have the same rating, they are a bit larger and heavier. Plenty of room under the canopy to get the cg spot on though. Oddly, this plane came with the older non-s battery but if you slide it as far forward as it will go, the cg is also fine. So apart from all these improvements, you've got a transmitter with trims, top left button for dual rates, and these can be switched in stabilized mode or non-stabilized "dynamic" mode, and that mode can be switched on or off via a button on the top right. Nice display on the transmitter. Super easy assembly. I added dark tape orientation stripes under each wing. It flies well. The beefier "s" batteries add a bit of heft and that helps in wind. I'd say a 10 mph wind is about tops for the best flying. Handles well enough with rudder and elevator. It would be nice to have a brushless outrunner but then I doubt you'd get it in at this price point.
WLtoys F959S Βασιλιάς του Ουρανού 2.4G 750mm Πλάτος φτερού EPO RC Αεροπλάνο RTF Λειτουργία 2 με 6-άξονα γυροσκόπιο
88,56€ 133,95€
0
Συστάσεις
Σχόλια (0)
Richard 13/03/2021
Construction is a bit tricky but not impossible. Trim a few mm off of the screw used to attach the wing. It is too long. Use a very good philips head screwdriver because the metal is soft and will strip out easily. Loosen the set screw that holds the elevator pushrods before attempting to attach the v-tail. I had to remove some material to make a proper channel through the elevator for the pushrods. I had to remove some material from the fuselage to make room for the ESC and receiver, as well as some material from the canopy interior. Receiver and battery will be a tight fit. Attach control horns to pushrods before gluing control horns to elevators. Make sure all of this is even (elevators neutral) before retightening the lag screw to secure the pushrods to the servo horn. My package did not include contact cement, I used "shoe glue".
FMS 800MM (31.5") Εύρος φτερού EPO V-Tail Αεροπλάνο RC Glider Αεροπλάνο PNP για αρχάριους
133,18€ 138,38€
1
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe