Όλα τα μηνύματα

Ερ: compatible with lithium or lifepo4 battery?

Ερώτηση από Ferdinand επί 2021-12-26 09:40:51

rs4 theoretically you can load lithium batteries but I do not recommend you to do it with this device because there is no setup where you can set the type of battery. You need additional load control corresponding to the load characteristic of your lithium batteries.

2021-12-26 12:53:29 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: Please provide the actual zoom measurement?

Ερώτηση από BG216143754 επί 2021-10-24 11:54:44

rs4 10 - 30x zoom. This is compared with my PTZ camera and the magnification of them is very close.

2021-10-25 11:37:09 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (5)

Ερ: what about quantity is ther only one or all the cameras as shown in photos

Ερώτηση από Bhushan Vanjiwale επί 2021-10-10 11:37:04

rs4 you can make your choice when you click on one of the items and can see there is a different price. So each camera module is a separated offer. The quality of the camera modules depends on there specifications and is well documented in the the product page.

2021-10-10 01:27:09 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Can this be used with Raspberry 3?

Ερώτηση από tselios επί 2021-09-17 07:54:11

rs4 yes of course ... and it is nearly the same way as with an arduino or other devices. Please make sure you add the 10 KΩ pull-up resistor between the 3.3 V and data line. The Adafruit Python DHT Sensor library makes interfacing the DHT22 easy.

2021-09-17 11:22:03 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (1)

Ερ: Does it come with filament?

Ερώτηση από BG172225493 επί 2021-09-03 11:55:12

rs4 It comes with a few meters filament. In my case about 10m. You can print a few small testobjects.

2021-09-03 12:08:45 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (4)

Ερ: how can i make it so he only takes pictures and no videos

Ερώτηση από BG171538321 επί 2021-08-23 01:26:55

rs4 you have to change the time.txt file. After date and time follows the work mode. For example the standard mode is 332Y. You have to change it to 132Y. Now the camera take only pictures.

2021-08-23 03:35:27 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (3)

rs4 Basically check all connections VCC, GND, Video and (Audio if cam has Audio). The camera have to be an analog one. You can change frequencies. Transmitter and Receiver needs 12V. Cams are variable from about 5 to 40V. Check also antenna connection.

2021-06-26 02:01:57 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: what is the reference for the 5 pins connector behind the usb? where to buy those cables?

Ερώτηση από BG533324810 επί 2021-03-29 07:42:00

rs4 This is the I2C connection to a sensor in this case a bme280. I think it is the Excellway® Mini Micro JST 2.0 PH 5Pin Connector Plug With 30cm Wires Cables --- you can search in this store.

2021-03-30 03:44:43 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: Why is it black and white even in broad daylight?

Ερώτηση από cf1990 επί 2021-03-12 09:46:14

rs4 This camera is a very low cost product. Mine takes no pictures in the darkness. There are a lot of different issues with this camera. May be there are different components in some lots of production. It is not worth to make any further effort to solve something.. if you get some one that everything works you are the lucky one ....

2021-03-13 02:41:55 Βοηθητικός (2)
υποβάλλουν
Απαντήσεις (2)

rs4 This is a wifi ip camera and you dont need a usb cable to connect it with your pc to get the live stream. The usb is only for power supply and programing. On your PC e.g. you need a wifi-stick and the ip-adress of the camera. On your PC search for the wifi signal of the cam and connect. (in the same way as on the android or ios phone) Tip the ip-adress in the browser and you will see the the live stream of the camera.

2021-03-01 04:19:12 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: it works with Raspberry 3 A ?

Ερώτηση από Pedro επί 2021-02-22 10:29:08

rs4 Hi, you have a model 3 A+ and it will work. This model have a csi camera port where you can connect this camera. Basically the A models are for sensors and automating because they are designed for low current consumption.

2021-02-22 01:18:22 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

rs4 Hi, my device currently did not reach this mark of 10KWh, but I think it takes a while from 10KWh to 11KWh and then it will display 11 KWh........ the counter continious from 10 to 11 then 12 and so on... and shows no more commas.

2021-02-07 02:25:25 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)