nabla
- Τα περιεχόμενα μου
- Όλα τα μηνύματα
- Κριτικές
- Σχόλια
- Απαντήσεις
- Ερωτήσεις
Απαντήσεις
Ερ: I've bought 2 of these boards and neither one does the sbus work on. what am I doing wrong
Ερώτηση από BG323134891 επί 2021-07-20 17:55:34
nabla had the same problem, u must flash it with OMNIBUSF4SD, note SD!!, Ports: activate SerialRx, Config: select serial based receiver and SBUS
Βοηθητικός (11)
Ερ: can i fly 2207 1900kv motors on 6s? can handle it? xiexie
Ερώτηση από LeoLuis επί 2020-10-02 13:40:24
nabla yes, but here is my advice: dont ;) These are not very melt-proof. These are rather cheap. user 2206er 1800kv-is motors. Your motors seem very very powerful. Better use 45A+
Βοηθητικός (0)
Ερ: I would like to know where to connect sbus receiver.
Ερώτηση από yuckey επί 2018-01-15 09:52:50
nabla had the same problem, u must flash it with OMNIBUSF4SD, note SD!!, Ports: activate SerialRx, Config: select serial based receiver and SBUS
Βοηθητικός (0)
Ερ: does the D8 FrSky Version work with the LBT Version of the Taranis X Lite?
Ερώτηση από protagonist1000 επί 2020-07-13 14:34:31
nabla LBT is D16, you need to flash D8 on your sender if it does not have it (in the menux next to where you bind stuff). Search a yt video where someone flashes D8 on the same type of transmitter. If it exists -> proof(it does work), it if does not exist -> kind of proof that it does not work. Anyways I flashed beta flight 4.1 on it (which i recommend besides JESC 48khz!!!) and you can just select betwen D, X and LBT which is D8, D16-FCC and D16-LBT
Βοηθητικός (0)Ερ: how I connect the receiver frsky r xsr ?
Ερώτηση από antonio282829 επί 2018-08-05 13:42:08
nabla u must flash it with OMNIBUSF4SD, note SD!!, Ports: activate SerialRx, Config: select serial based receiver and SBUS
Βοηθητικός (0)
nabla confirmed, for everybody who is ancious about it, it is the NOX although it says target:NOX1
Βοηθητικός (0)
nabla yes, you propably have a configuration error. Check the ports tab define Uart6 as serial RX and in config tab select serial-rx and then sbus. use the pad that says SBUS. I have had the same problem. was it uart6? i am not shure, but only one of them works as sbus!!
Βοηθητικός (1)