Skilteskoven
- Τα περιεχόμενα μου
- Όλα τα μηνύματα
- Κριτικές
- Σχόλια
- Απαντήσεις
- Ερωτήσεις
Απαντήσεις
Ερ: Where can i find programming software for the Baofeng UV-9R Plus?
Ερώτηση από asdfgh επί 2019-05-12 12:01:58
Skilteskoven No, it's to big.
Βοηθητικός (0)
Ερ: Do i connect directly to power or is a resistor needed?
Ερώτηση από Adriaantylpro επί 2019-08-21 03:54:14
Skilteskoven That depends on the Voltage you apply! If you apply more than 3 V, then you would need a resistor to limit the current through the LED! Let's suppose that you use a 5 V supply. The voltage drop accross the LED's according to the specifications is 3 V, then you would need a voltage drop of 2 V over the resistor. Again, according to specifications, the current through the LED is (max) 20 mA. Then using Ohm's law you could calculate the value of the resistor: R = U/I =2 V/0,02A = 100 Ohm. This is minimum value, so I suggest you use a 120 Ohm resistor :-) For a 12 V supply the calculation is: R = (12-3) V/0,02A = 450 Ohm (minimum)
Βοηθητικός (1)
Skilteskoven Have a look here: www.baofengradio.co.uk/programming-software/ - model "R760 Waterproof" is suitable for UV-9R Plus
Βοηθητικός (1)