RF-Power8000 1Mhz-8000Mhz OLED RF Power Meter -55dBm ~ -5dBm Ρυθμιζόμενη τιμή εξασθένησης
Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.
Don't forget to purchase a 2W 30dB (1000 divider) attenuator to get a direct dBm display. Mine came with a +0.3dB offset so I assume it was calibrated at the factory. I tested it with various VTX 5.8GHz transmitters and the power is very accurate, I also tried to insert a set of attenuators and got a very precise value, within +/- 0.1dB range. Very convenient to check the output power or measure the attenuation on cables and SMA connectors, I don't regret my purchase.
Surprising accuracy. A fraction of the cost of another brand but readings are the same. Very happy with this power meter.
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.
Fitted a 30db attenuator to measure FPV VTX modules and it seems to do the job fine.
Measures something, it might be even quite OK (values make some sense when checking TX power). But the issue is: set frequency is not bandwith, looks like it is a top limit frquency of LP filter, as more I set, bigger value is measured. So definitely it doesn't measure what it is supposed to. Also instructuons are nonexistent, so basically I have no idea if I could fix the problem on my own. On the good side, it can be used to compare antennas and verify TX settings regarding output power.
Аналог ImmersionRC. Измеряет уровень РЧ сигнала. Настройками задается верхняя граница частоты измеряемого сигнала и ослабление.
ok
Works ok
nice unit!
A good and easy way to measure with this power meter. And most importantly, you get a good device for reasonable money. I did not regret what I bought. Even put the USB cable. I'm satisfied.