Fantastic RFID cabinet lock. Fast and really solid. Only downside is the lack of documentation, and you need guess how it works. Would be great have a piece of paper with basic operation instructions. It supports until 50 cards and has a auxiliary power cable that you can connect to a USB in case you rid out of battery. If someone needs it, this are the Operation Instructions in Single Unlock Mode that i found around the net: *1.Initialization:* After installing the battery, hold on the RESET button (passing a small hard object through the hole in the front of the lock cylinder to press the reset button). When you hear a "Di" sounds, release the hand. The lock beeps: "Di, Di, Di, Di, Di” (five short beeps). At this point, the lock is initialized (clear lock record) state, in Single Mode. *2.Set Management Card:* After initializing, the first card (RFID Card / Tag) is swiped in the sensing area of the lock body. After a sound ("Di-Di") is made, the card becomes a Management Card. Management card can be used to unlock the cabinet door, add or delete the user card. *3.Set User Card:* Swipe the management card (After reading successfully, the lock beeps "Di", in an unlocked state, new user card can be configured), put new card on the sensing area until you hear a short beep which means the setting is successful. The user card can be set continuously (up to 15 pcs). *4.Delete User Cards:* Put the management card on the lock body sensing area and do not take away. If the card is read successful, the lock pin will retract in the lock cylinder, at the same time the lock beeps a long sound. Then the lock beeps (Di, Di, Di, Di) quickly, followed by 3 long beeps (Di-, Di-, Di-), indicating that all user cards and management card have been deleted.

Fantastic RFID cabinet lock. Fast and really solid. Only downside is the lack of documentation, and you need guess how it works. Would be great have a piece of paper with basic operation instructions. It supports until 50 cards and has a auxiliary power cable that you can connect to a USB in case you rid out of battery. If someone needs it, this are the Operation Instructions in Single Unlock Mode that i found around the net: *1.Initialization:* After installing the battery, hold on the RESET button (passing a small hard object through the hole in the front of the lock cylinder to press the reset button). When you hear a "Di" sounds, release the hand. The lock beeps: "Di, Di, Di, Di, Di” (five short beeps). At this point, the lock is initialized (clear lock record) state, in Single Mode. *2.Set Management Card:* After initializing, the first card (RFID Card / Tag) is swiped in the sensing area of the lock body. After a sound ("Di-Di") is made, the card becomes a Management Card. Management card can be used to unlock the cabinet door, add or delete the user card. *3.Set User Card:* Swipe the management card (After reading successfully, the lock beeps "Di", in an unlocked state, new user card can be configured), put new card on the sensing area until you hear a short beep which means the setting is successful. The user card can be set continuously (up to 15 pcs). *4.Delete User Cards:* Put the management card on the lock body sensing area and do not take away. If the card is read successful, the lock pin will retract in the lock cylinder, at the same time the lock beeps a long sound. Then the lock beeps (Di, Di, Di, Di) quickly, followed by 3 long beeps (Di-, Di-, Di-), indicating that all user cards and management card have been deleted.

Fantastic RFID cabinet lock. Fast and really solid. Only downside is the lack of documentation, and you need guess how it works. Would be great have a piece of paper with basic operation instructions. It supports until 50 cards and has a auxiliary power cable that you can connect to a USB in case you rid out of battery. If someone needs it, this are the Operation Instructions in Single Unlock Mode that i found around the net: *1.Initialization:* After installing the battery, hold on the RESET button (passing a small hard object through the hole in the front of the lock cylinder to press the reset button). When you hear a "Di" sounds, release the hand. The lock beeps: "Di, Di, Di, Di, Di” (five short beeps). At this point, the lock is initialized (clear lock record) state, in Single Mode. *2.Set Management Card:* After initializing, the first card (RFID Card / Tag) is swiped in the sensing area of the lock body. After a sound ("Di-Di") is made, the card becomes a Management Card. Management card can be used to unlock the cabinet door, add or delete the user card. *3.Set User Card:* Swipe the management card (After reading successfully, the lock beeps "Di", in an unlocked state, new user card can be configured), put new card on the sensing area until you hear a short beep which means the setting is successful. The user card can be set continuously (up to 15 pcs). *4.Delete User Cards:* Put the management card on the lock body sensing area and do not take away. If the card is read successful, the lock pin will retract in the lock cylinder, at the same time the lock beeps a long sound. Then the lock beeps (Di, Di, Di, Di) quickly, followed by 3 long beeps (Di-, Di-, Di-), indicating that all user cards and management card have been deleted.

Handy and usefull device with the appropriate quality, 41 days passed untill it arrived.

Handy and usefull device with the appropriate quality, 41 days passed untill it arrived.

Handy and usefull device with the appropriate quality, 41 days passed untill it arrived.

Δεν κατάλαβα αμέσως τι έχω

даже не сразу понял, что я получил

Δεν κατάλαβα αμέσως τι έχω

проверил, работает 🖐 баллов

проверил, работает 🖐 баллов

проверил, работает 🖐 баллов

very good

very good

very good

denemedim idare eder

denemedim idare eder

denemedim idare eder

great! i will order more :)

great! i will order more :)

great! i will order more :)

fast respons, fast delivery, material very solid, recommended

fast respons, fast delivery, material very solid, recommended

fast respons, fast delivery, material very solid, recommended

Αυτό είναι ένα πολύ αστείο και πρακτικό εργαλείο. Να σου προτείνω.

That is a very funny and practical device. Recommend.

Αυτό είναι ένα πολύ αστείο και πρακτικό εργαλείο. Να σου προτείνω.

Πολύ καλά

Very Good

Πολύ καλά