Its a good way to compare multi meters. Sadly I have no certified nor perfectly calibrated device to check the precision of this reference. I just wanted to check the deviation of my meters and it looks good for me by using this reference. First of all, I soldered a spare LiPo I had laying around that fits into the case. I never would use an unstable USB input to measure my meters. USB charging works perfectly, but the battery looses energy over time. Possible that this device eats some micro ampere, even if its off. But it charges fully in a short time. I tested it with a Vichy VC99 (about 10yrs old), ANENG AN8002 (about 4 yrs old) and UNI-T UT204+ (5 months old). Results were: Vichy VC99: 2.498V | 5.000V | 7.49V | 9.99V UNI-T UT204+: 2.501V | 5.006V | 7.49V |9.99V ANENG AN8002: 2.494V | 4.991V | 7.48V | 9.97V Closest one was my bulky Vichy VC99 and the worst result has my ANENG AN8002. But in the end I'm ok with the result and I will still use all of these 3 meters as the worst measured value was just 0.3% off.

Its a good way to compare multi meters. Sadly I have no certified nor perfectly calibrated device to check the precision of this reference. I just wanted to check the deviation of my meters and it looks good for me by using this reference. First of all, I soldered a spare LiPo I had laying around that fits into the case. I never would use an unstable USB input to measure my meters. USB charging works perfectly, but the battery looses energy over time. Possible that this device eats some micro ampere, even if its off. But it charges fully in a short time. I tested it with a Vichy VC99 (about 10yrs old), ANENG AN8002 (about 4 yrs old) and UNI-T UT204+ (5 months old). Results were: Vichy VC99: 2.498V | 5.000V | 7.49V | 9.99V UNI-T UT204+: 2.501V | 5.006V | 7.49V |9.99V ANENG AN8002: 2.494V | 4.991V | 7.48V | 9.97V Closest one was my bulky Vichy VC99 and the worst result has my ANENG AN8002. But in the end I'm ok with the result and I will still use all of these 3 meters as the worst measured value was just 0.3% off.

Its a good way to compare multi meters. Sadly I have no certified nor perfectly calibrated device to check the precision of this reference. I just wanted to check the deviation of my meters and it looks good for me by using this reference. First of all, I soldered a spare LiPo I had laying around that fits into the case. I never would use an unstable USB input to measure my meters. USB charging works perfectly, but the battery looses energy over time. Possible that this device eats some micro ampere, even if its off. But it charges fully in a short time. I tested it with a Vichy VC99 (about 10yrs old), ANENG AN8002 (about 4 yrs old) and UNI-T UT204+ (5 months old). Results were: Vichy VC99: 2.498V | 5.000V | 7.49V | 9.99V UNI-T UT204+: 2.501V | 5.006V | 7.49V |9.99V ANENG AN8002: 2.494V | 4.991V | 7.48V | 9.97V Closest one was my bulky Vichy VC99 and the worst result has my ANENG AN8002. But in the end I'm ok with the result and I will still use all of these 3 meters as the worst measured value was just 0.3% off.

Хороший прибор, пайка как ни странно на плате качественная. Единственное что огорчило, это то что не идёт в комплекте лист с контрольными измерениями, буду теперь искать эталонный прибор чтоб сделать эти измерения. Упаковка хорошая, товар приехал без повреждений. Батарею покупал отдельно, все работает и батарея заряжается. Точно ещё не тестировал, но с первых тестов моих показания прибора не зависят от напряжения питания, например на разряженной АКБ и полностью заряженной показания одни и те же, это радует. Хотел поставить разъем на плату для подключения АКБ, там даже место под него есть, но из за гнезд он не влазит. Защитную пленку пока не снимал с оргстекла. Покупкой доволен, все хорошо. Бангуд, как всегда, порадовал! Рекомендую!

Хороший прибор, пайка как ни странно на плате качественная. Единственное что огорчило, это то что не идёт в комплекте лист с контрольными измерениями, буду теперь искать эталонный прибор чтоб сделать эти измерения. Упаковка хорошая, товар приехал без повреждений. Батарею покупал отдельно, все работает и батарея заряжается. Точно ещё не тестировал, но с первых тестов моих показания прибора не зависят от напряжения питания, например на разряженной АКБ и полностью заряженной показания одни и те же, это радует. Хотел поставить разъем на плату для подключения АКБ, там даже место под него есть, но из за гнезд он не влазит. Защитную пленку пока не снимал с оргстекла. Покупкой доволен, все хорошо. Бангуд, как всегда, порадовал! Рекомендую!

Хороший прибор, пайка как ни странно на плате качественная. Единственное что огорчило, это то что не идёт в комплекте лист с контрольными измерениями, буду теперь искать эталонный прибор чтоб сделать эти измерения. Упаковка хорошая, товар приехал без повреждений. Батарею покупал отдельно, все работает и батарея заряжается. Точно ещё не тестировал, но с первых тестов моих показания прибора не зависят от напряжения питания, например на разряженной АКБ и полностью заряженной показания одни и те же, это радует. Хотел поставить разъем на плату для подключения АКБ, там даже место под него есть, но из за гнезд он не влазит. Защитную пленку пока не снимал с оргстекла. Покупкой доволен, все хорошо. Бангуд, как всегда, порадовал! Рекомендую!

Ωραίο προϊόν. Το δοκίμασα στο μετρητή που δανείστηκα από το εργαστήριό μου και το ωραίο σημείο του.

great product. tested on my Fluke meter I borrowed from mu lab and its pretty spot on.

Ωραίο προϊόν. Το δοκίμασα στο μετρητή που δανείστηκα από το εργαστήριό μου και το ωραίο σημείο του.

Εντάξει, το εργαλείο του πάγκου...

Ok, ferramenta de bancada...

Εντάξει, το εργαλείο του πάγκου...

es punto de funcionamiento

es punto de funcionamiento

es punto de funcionamiento

Всё хорошо. Ещё не проверил

Всё хорошо. Ещё не проверил

Всё хорошо. Ещё не проверил

It works great! I love that I can just add a Lithium Ion rechargeable to it and it includes a 5V switching upconverter and a charge controller that charges it from micro USB. Before you add a battery, it will gladly run from USB power. I am only subtracting stars because the wires are barely soldered onto the banana jacks, and the wires to the power switch are soldered to a couple of surface mount parts, not to pads on the board. The rest of the construction is great! No instructions included. Operation is fairly simple, plug it in, and press the button for about 1 second to switch between voltages. It should at least include instructions on how to connect a LiIon cell. Use the B+ and B- to connect a single LiIon cell. It makes me a bit nervous that the banana jacks are just open holes. I was extra careful putting my meter's test leads in there. It would be easy to short it to some part of the PCB. If you want to see the insides, you'll have to take it apart first, because they only peeled the protective paper from the top acrylic piece.

It works great! I love that I can just add a Lithium Ion rechargeable to it and it includes a 5V switching upconverter and a charge controller that charges it from micro USB. Before you add a battery, it will gladly run from USB power. I am only subtracting stars because the wires are barely soldered onto the banana jacks, and the wires to the power switch are soldered to a couple of surface mount parts, not to pads on the board. The rest of the construction is great! No instructions included. Operation is fairly simple, plug it in, and press the button for about 1 second to switch between voltages. It should at least include instructions on how to connect a LiIon cell. Use the B+ and B- to connect a single LiIon cell. It makes me a bit nervous that the banana jacks are just open holes. I was extra careful putting my meter's test leads in there. It would be easy to short it to some part of the PCB. If you want to see the insides, you'll have to take it apart first, because they only peeled the protective paper from the top acrylic piece.

It works great! I love that I can just add a Lithium Ion rechargeable to it and it includes a 5V switching upconverter and a charge controller that charges it from micro USB. Before you add a battery, it will gladly run from USB power. I am only subtracting stars because the wires are barely soldered onto the banana jacks, and the wires to the power switch are soldered to a couple of surface mount parts, not to pads on the board. The rest of the construction is great! No instructions included. Operation is fairly simple, plug it in, and press the button for about 1 second to switch between voltages. It should at least include instructions on how to connect a LiIon cell. Use the B+ and B- to connect a single LiIon cell. It makes me a bit nervous that the banana jacks are just open holes. I was extra careful putting my meter's test leads in there. It would be easy to short it to some part of the PCB. If you want to see the insides, you'll have to take it apart first, because they only peeled the protective paper from the top acrylic piece.

Πολύ καλή και ακριβής αναφορά για βαθμονόμηση των οργάνων μέτρησης. Είναι καλό να πρέπει να επαληθεύεται η ακρίβεια ή ως ακριβής αναφορά τάσης. Όχι φτηνό, αλλά αξίζει την τιμή

Very good and accurate reference for measurement instruments calibrations. Good to have to verify accuracy or as a precise voltage reference. Not cheap, but worth the price

Πολύ καλή και ακριβής αναφορά για βαθμονόμηση των οργάνων μέτρησης. Είναι καλό να πρέπει να επαληθεύεται η ακρίβεια ή ως ακριβής αναφορά τάσης. Όχι φτηνό, αλλά αξίζει την τιμή

Strumento indispensabile per taratura multimetro.

Strumento indispensabile per taratura multimetro.

Strumento indispensabile per taratura multimetro.

Great little tool. Seems accurate enough down to the millivolt.

Great little tool. Seems accurate enough down to the millivolt.

Great little tool. Seems accurate enough down to the millivolt.