xenomorf Theprice you are seeing is for the structure alone. You will need to purchase the laser and overhead gantry separately. As for the pricing on other things i can't help you.

xenomorf I use the largest laser i can afford. Currently i use a 40 watt laser with this table. The larger the laser the more it can cut. Most software has a power setup in it so you can adjust the lasers power. You don't want to be cutting a piece of paper with an 80 watt laser set to full power. The power settings you need to experiment with. As for your question about the machine i don't know about that. You will have to see what accessories are available for it and go from there.

xenomorf Product should be able to cut mdf. The laser that the machine uses is a diode laser which should be able to cut mdf. You will have to make more then one pass though. How many i can't say. The 40 or 80 watt should be sufficient for most of your cutting. This is my opinion only. What i cut and what you cut are two different things. The mdf cutting have n o idea for your region since i have no ideas if the mdf is made the same in your country as in my country. For me i would recommend to 80watt but buy what you can afford. Hope this helps.