Όλα τα μηνύματα

Ερ: Why is this motor so expensive?

Ερώτηση από Yzerwafels επί 2021-04-04 03:15:44

WiniTang don't know

2021-05-08 07:08:40 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Yzerwafels thereare a ton of build video's for this qued, instructions voor duist wuur

BG411817402 20/12/2020
So far so good. Very smooth and snappy flier. However, there is no instructions anywhere to be found, which isn't a big deal if you are handy and have a little experience with these things, and you probably do considering this is a kit and you are here! If you were to follow what the pictures shows, you will undoubtedly have GPS problems. Carbon Fiber is conductive, therefor it grounds easily. I'm not saying for sure that the chassis is grounded on your build, but it probably is. It just seems to happen. Even when it's not grounded, it will still cause issues. But the grounded chassis will behave like an RF shield, making it very difficult to get a satellite to lock onto your GPS module. May leave you sitting there for a while, waiting for it to connect, or it may just have a terrible connection that is dropping all the time. So do yourself a favor and don't mount the module where it is showing it mounted. I didn't even bother looking to see where they mounted it, I just mounted mine on the top, as usual. I would encourage putting some stiff foam around it, maybe you have some kicking around for landing pads? That's what I used and it works well. But it doesn't leave room for the camera mount, so you'll need to figure something else out for that. You can just mount the GPS on a carbon fiber rod, elevating it above where the camera mount is. Hindsight being what it is, that's what I would have done. Still may change it in the future, but for now it's fine. Good luck and have fun, awesome drone that flies fantastic on 4S packs as well as 5 and 6S. Smooth as butter, quiet too. Like a Sunday driver, even when it's going a million MPH!
1
Σχόλια (1)

Ερ: Does it fit for jumper t8sg plus?

Ερώτηση από FabianGräfen επί 2019-10-06 02:56:32

Yzerwafels Did you try yet ? does it fit the jumper t8sg ?

2020-08-05 07:10:30 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (3)

Ερ: latency

Ερώτηση από Yzerwafels επί 2018-11-25 12:30:22

Hyenad It has low latency around 100ms

2018-12-04 02:10:47 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)