Όλα τα μηνύματα

vandergus The wltoys a959 12mm hexes are compatible with this car. And I would not recommend upgrading to a brushless motor. It's hard enough to keep the drive train up and running with the stock motor. Can't imagine doing it with more power running through. The car comes with a combo Receiver-ESC so you're not just looking at a new motor and ESC. You'll also need a new transimitter and receiver and probably a new servo.

2020-09-16 12:18:31 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (2)

Ερ: How the battery is Li-ion and Li-po at the same time i think it is li-po because the 15c

Ερώτηση από medo519 επί 2019-04-03 10:01:24

vandergus From the photos it looks like two 18650 li-ion cells shrink wrapped. It is not lipo.

2020-08-19 09:10:11 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

BG412039431 1) A physically larger motor require some customized mounting bit might be doable. You would need a new ESC, though, and this car has a combo receiver ESC unit. So if you put in a new ESC, you would need to put in a new receiver to be able to talk to it. 2) Yep, the wltoys shocks should fit. HBX also makes some all aluminum shocks for their 18 scale cars that fit. 3) You should be able to but I was having a real hard time getting the larger bearing out of my steering blocks. You need a 12mm x 8mm x 3.5mm bearing and a 8mm x 4mm x 3mm bearing for each wheel. 4) See question 1.

2020-07-20 01:19:39 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: where can I get the wheels drive shafts for this car and how long are they

Ερώτηση από BG474313189 επί 2020-06-10 12:48:28

BG412039431 The front and rear drive shaft are 55 mm long. I replaced mine with the metal drive shafts for the Wltoys a959. They are about 3 mm shorter but have been working fine. I also had to sand down the cross pin a bit to fit in the differential cups. The car really needs metal drive shafts, though, so I would recommend the Wltoys parts.

2020-07-20 01:12:36 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Does this car has metal bearings for the wheels or transmission?

Ερώτηση από ANUJM επί 2019-05-24 12:43:33

BG412039431 The wheels have bushings but the main drive shaft and differential outputs are on bearings.

2020-07-20 01:06:09 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (2)

Ερ: Is It really 30kph

Ερώτηση από Jeeva Sid επί 2018-03-19 12:10:45

BG412039431 Most speed tests on these cars top out around 25 kph.

2020-07-20 12:59:44 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Can you upgrade the motor to a brushless one?

Ερώτηση από BG225363840 επί 2020-04-30 05:12:52

BG412039431 It would be difficult. The stock electronics have the receiver and ESC combined on the same PCB. A new brushless motor would require a new ESC but you wouldn't be able to connect it to the receiver. You have to get a new receiver (and transmitter) and ESC to make a brushless work.

2020-07-20 12:54:35 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: Apart from the balance plug what other type of connector is on the battery?

Ερώτηση από garetmcc επί 2018-02-08 03:07:32

BG412039431 It's a 2-pin JST SM connector.

2020-07-20 12:52:03 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: battery's plug?

Ερώτηση από vlakey επί 2018-02-23 04:46:15

BG412039431 The battery uses a 2-pin JST SM connector for the main power. It also has a standard 2s balance connector for charging.

2020-07-20 12:51:27 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Is it okay to give this as a gift?

Ερώτηση από JoseB επί 2019-08-06 02:06:23

BG412039431 I would not recommend this as a gift because of the maintenance required. I have a couple and they each required a few part upgrades to continue working. It's fine for me because I wanted a toy that would give me and my kids fun mechanical projects to work on. But if I gave one as a gift, I would be afraid it would stop working after a week and the kid would be left with a dead toy.

2020-07-20 12:40:34 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: can i upgrade in brushless motor

Ερώτηση από RS Vlogs επί 2020-07-05 09:09:49

BG412039431 Maybe? The most difficult part is that the receiver and ESC are a single unit. If you put in a brushless motor, it would require a new ESC unit, which you could probably find a way to mount but wouldn't be able to connect to the receiver. You could also get a new receiver (and transmitter) and replace the stock receiver-ESC unit entirely but that's getting expensive.

2020-07-20 12:36:07 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)