SonofNel
Τα περιεχόμενα μου
Όλα τα μηνύματα
Κριτικές
Σχόλια
Απαντήσεις
Ερωτήσεις

Όλα τα μηνύματα

SonofNel 27/05/2020
To start, the product fits and secures snugly in my 0xa tool post. The dovetails are well machined and polished, they even took extra time to chamfer the 90° edges and corners that could be uncomfortable when holding it & tightening a tool piece into the holder. ( Nice Job ) I tossed in a comparison piece and covered the brand name because its not important. You will notice the much more expensive 250-001 tool holder (blue tape) did not take the time to chamfer edges and inside the Dado where your tooling will rest the back is not polished and left ruff. They did however also paint/anodize the inside of the Dado. Personally I like the polished metal over more anodizing it does leave more surface exposed and possible damage can take place if you don't take care of the bare surfaces. That part will be a personal preference. Now for a couple small dislikes. The depth from front to back on the more expensive tool holder is 19.98mm the new units are 19.22 it is small but was noticeable without even measuring. I am not sure if the 0.76mm will effect the over all rigidness, or maybe lead to bending dovetails later down the road. I really hope not and would reach out to the manufacturer if an issue came up. The second issue is with the Bottom shelf of the Dado. My original Tool holder has a shelf thickness of 4mm. and the new units have a shelf thickness of 3.82. yes it is small 0.18mm. and this being one of the thinner portions of the tool holder I really wood have liked to see that at full thickness 4mm. Time will tell as I am a chronic over tightener, if the shelf will bend as I tighten the tooling secure screws, or if vibration or chatter over time will weak it to a failing point. The cost was great they arrived early, slightly under packaged for any type of impact damage that could take place in my opinion but they were well oiled and protected from moisture threats.
Machifit 250-000 Σετ εργαλείων αλλαγής τύπου GIB τύπου γωνιάς 250 001-010 Βάση εργαλείων για την τόρνο
US$18.47 US$18.99
5
Συστάσεις
Σχόλια (0)
SonofNel 20/01/2022
Received promptly, before quited time by several days. Item arrived packaged and protected sufficiently. Cutters fit perfectly into my current Thread Cutting Tooling. Tested cutters on mini lathe with H13, very light passes, threads did need a small amount of buffing after cutting was completed, likely because of light passes and insufficient rigidity and press from maxhine size. I would purchase these inserts again.
2 τεμάχια εισαγωγής κοπής αριθμού 11IR A55 / 11NR A55 από καρβίδιο για εργαλείο εσωτερικής τορνάρισης
US$12.69 US$13.99
1
Συστάσεις
Σχόλια (0)
SonofNel 23/03/2021
Likely because of popularity they took a while to get initially shipped out, but once shipped they arrived in the normal time frame. The inserts cut Aluminum extremely well and can be used for finishing. This is another item I will definitely be ordering more of. Added a few pictures of the inserts installed in a few different cutters I use them in.
10 τεμάχια APKT1135PDFR-MA ένθετα καρβιδίου για αλουμίνιο
US$19.62 US$20.99
1
Συστάσεις
Σχόλια (0)
SonofNel 09/08/2021
The inserts arrived promptly and were as described, They work well with my boring bars and when the time comes I will be ordering more.
10τεμ. Εισαγωγέας από καρβίδιο TCMT110204 VP15TF / TCMT21.51 VP15TF για στροβιλοτόρο
US$12.69 US$13.99
1
Συστάσεις
Σχόλια (0)
SonofNel 15/03/2021
Item received timely and well packaged, not rust issues and threads are well defined, no issues seating into R8 collect hole, and my 50mm boring head attaches with no issues, I have not yet tried a 75mm boring head.
Κάτοχος στεγανών κεφαλών MT2 MT3 R8 για τον φορτίο του τόρνου
US$32.33 US$33.99
1
Συστάσεις
Σχόλια (0)
SonofNel 15/03/2021
Items received as described, they fit nicely in my parting tools and worked well with mild steel,
10 τεμάχια ZQMX 2N11-1E SP200 GTN-2 2mm Επεξεργασία αποκόπτοντας υλικό από κράμα καρβιδίου CNC
US$19.62 US$20.99
1
Συστάσεις
Σχόλια (0)
SonofNel 07/03/2020
I am pleased with the unit at this time, charges in a reasonable amount of time & now at about 2 weeks of daily use. about 10 measures per day it is still above 50% charge.
ATuMan DUKA LS-1S Έξυπνος χάρτης απόστασης με οθόνη LCD Ανεξάρτητος αισθητήρας μετρητή απόστασης Φόρτιση
US$21.99 US$35.99
1
Συστάσεις
Σχόλια (0)
SonofNel 07/03/2020
The cutters are going to be good for rough cutting, and all but 1 are in useable condition.
Drillpro 10τμχ DCMT0702 EM YBC205 Καρβίδιο Insert Turning Tool Holder Inserts For Stainless Steel
US$13.85 US$14.99
1
Συστάσεις
Σχόλια (0)
SonofNel 15/03/2021
Arrived well packaged and as described. Great little inserts I will definitely be ordering another set.
Drillpro 10 τεμ RCGT10T3 MOAK H01 Προσθέτης καρβιδίου CNC Εργαλείο Εισαγωγής Χρησιμοποιείται για αλουμίνιο
US$21.93 US$22.99
1
Συστάσεις
Σχόλια (0)
SonofNel 11/08/2021
Great laser, performs very well and is visible when using it as a pointer with fellow star gazers. Itvis primarily used to point out stars and stars clusters so others can point their telescopes appropriately. It also can with a Kaleidoscope end cap which I have included a few pictures of the patterns.
10 μίλια Green Στυλό λέιζερ 532nm USB Chargeable Laser Flashlight Quick Charge Pointer with Lanyard
US$17.59 US$19.99
9
Συστάσεις
Σχόλια (1)
SonofNel 21/02/2021
It did not come with inserts, but they were easy to locate dor the Steal cutting inserts, The Aluminum inserts have been tricky to acquire. The supplied torx screwdriver is sufficient for installing the inserts.
EMR 5R-50-22 4 Φλάουτα Κοπής Μύλου Κοπής Κοπής CNC Φρεζάρισμα για Επίπεδη Κοπή
US$22.48 US$22.99
1
Συστάσεις
Σχόλια (1)
SonofNel 25/02/2021
Arrived as described and properly packaged, The 0 marker lines up extremely close to 0 when in the 0 position. The Hex Wrenches were included but not pictured. Overall it is well put together and holds together appropriately. No issues mounting it to an R8 to F1 shank. There was a very small amount of light surface rust inside the base of 1 of the boring holes but not on a surface that tooling or cutters come in meaningful contact with. The rust was easily removed with a Qtip I will include the rust picture as the last picture featured
Κεφαλή τρυπανιού 50mm για τόρνο φρέζας
US$54.27 US$56.99
3
Συστάσεις
Σχόλια (0)
Σετ μολύβδου 6Pcs τύπου 250-000 GIB Ταχεία Αλλαγή GIB Γιαλόχος Εργαλείων για Εργαλειοθήκες τόρνου
US$95.99 US$159.99

Ερ: Part #250 - 004 I know specs for the bore is 0.5" I wish a sleeve for all of the 12mm and 10mm boring bars sold here was included like the 0.5" to 0.125" (1/2" to 3/8") or a metric version of this part was available. please let me know if this is something that might be available. Thank you.

Ερώτηση από SonofNel επί 2022-01-26 01:57:32

Obnubilate https://www.banggood.com/Machifit-250-000-Cuniform-GIB-Type-Quick-Change-Tools-Kit-Tool-Post-250-001-010-Tool-Holder-for-Lathe-Tools-p-1434251.html?cur_warehouse=CN&ID=515569&rmmds=detail-top-buytogether-auto&trace_id=ab861643333551707

2022-01-28 08:32:04 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
Εργαλείο τόρνου Drillpro CT-12 50 τεμαχίων από καρβίδιο με 7 τμήματα κρατητήρων μετατροπής κεφαλής Ø 12mm DCMT070204 CCMT060204 MGMN200
US$45.99 US$86.99

Ερ: How big are the tool holders in inches?

Ερώτηση από BG535639455 επί 2020-11-26 08:38:19

SonofNel 12mm = 0.472" 100mm = 3.937" 150mm = 5.905" 160mm = 6.299" Hope that helps.

2022-01-20 03:10:27 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (4)
SonofNel 11/02/2020
This is the filtered model, the out is great and the filter does an excellent job of not letting stray light through. The light arrived as described and undamaged, but the flashlight and its box from the manufacturer were just in a plastic bag for shipping. The box itself was in quite bad shape. Outdoor use for locating minerals in rocks has been successful during the day at 2 meters or less. At Night you can easily go 15 meters +
Συνοδεία S2 Γκρι 7135 * 5 365nm UV Φακός Ανίχνευσης Φθορισμού Αποστείρωσης Χαρτονομισμάτων
US$39.26 US$40.99
2
Συστάσεις
Σχόλια (0)
Machifit 250-000 Σετ εργαλείων αλλαγής τύπου GIB τύπου γωνιάς 250 001-010 Βάση εργαλείων για την τόρνο
US$18.47 US$18.99

Ερ: The selection method is very ambiguous and doesn't make much sense. I cannot figure out how to select what I want.

Ερώτηση από presch επί 2019-07-07 01:20:41

SonofNel The description will match the or ordering number with the specific Item# hope this helps take care. Type-Item# 0_250-000 01_250-001 02_250-002 04_250-004 05_250-005 07_250-007 10_250-010

2022-01-09 05:54:24 Βοηθητικός (2)
υποβάλλουν
Απαντήσεις (3)
SonofNel 12/02/2020
Arrived well packaged & protected no rust, heavy coating of oil. while cleaning the packaging/storing oil I found quite a bit of small metal debris in the slide channel & would recommend to anyone to make sure to give it a real good cleaning before use. The numbers and graduation marks depending on lighting can be difficult to see. They are not quite as dark as other brands. They are well etched/lasered on the metal and I wouldn't worry about them fading over time. There we several minor chips/marks on the metal. It came with a hex key to tighten or losen the slide, but to disassemble the unit you will need to supply your own hex keys.
Ρυθμιζόμενο γωνιακό μέτρο V-block Machifit Angle Grinder KP25 0-60 Μοίρες Πλακέτα γωνίας ακριβείας για εργαλεία μέτρησης
US$38.10 US$39.99
5
Συστάσεις
Σχόλια (0)
SonofNel 10/08/2021
Great inserts I used them for the first time a few days after receiving them and I am very pleased with their functionality. I did notice until today when grabbing a few unused inserts for pictures, but 1 insert out of the bunch has a very small manufacturing flaw, I will contact them later, but have no worries about the the flaw being taken care of to my satisfaction. I would purchase these again.
Ταράνδος 10 τεμαχίων Nano HRC52 APMT1604PDER NB7010 25R0.8 Καρβιδίου Inserts για Mill Cutter CNC Tool από τη Drillpro.
US$36.95 US$38.99
7
Συστάσεις
Σχόλια (0)
SonofNel 24/02/2020
The unit arrived well packaged & protected. No rust issues, but I did have to clean a decent amount of oil & a bit more machine fouling than I believe should be acceptable on any type of part being labeled precision. The chuck mounted up to my existing Little Machine Shop adapter plate. The first item i tossed in the chuck was a piece of 6mm Brass Round Bar & with not much effort I was able to have it centered to 0.0005" My only complaint is 2 of the 4 chuck jaws were not completely machined & they stopped short of completely facing off the face of the jaws. Pictures included will show the facing issue which I will turn & Face again on my own. At this point it is a product I would definitely purchase again in the future.
Τρόχαλος SANOU K72 80/100/125mm 4 Σφραγισμένοι Ανεξάρτητοι Σκληρυνθείς Αντιστρεπτικό Εργαλείο
US$90.84 US$97.99
6
Συστάσεις
Σχόλια (0)
SonofNel 10/08/2021
Awesome little inserts, tested them with a boring bar, and the results were fantastic on the first test run. I will purchase these again in the future if more are needed.
10 τεμάχια εισαγωγής καρβιδίου TCMT110204 για κάτοχους εργαλείων τόρνου Drillpro
US$15.00 US$15.99
2
Συστάσεις
Σχόλια (0)

Είστε ο ειδικός, μπορείτε να βοηθήσετε;

Σας προσκαλούμε ειλικρινά να εγγραφείτε στο email πρόσκλησης απάντησης!

Εάν εγγραφείτε, θα σας προσκαλέσουμε μέσω email για να απαντήσετε σε ερωτήσεις που έχουν οι άνθρωποι σχετικά με τα προϊόντα. Με την εγγραφή σας] θα κερδίσετε επίσης το "Χρήσιμο σήμα "! Μπορείτε να διαγραφείτε ανά πάσα στιγμή στη σελίδα ρυθμίσεων απορρήτου.

Βοηθήστε τους άλλους και γίνετε πιο ευτυχισμένοι!

  • Εγγραφείτε

Σχετικά με τα σήματα

Τα σήματα σχετίζονται με την κοινότητα και οι χρήστες κερδίζουν σήματα δημιουργώντας ποιοτικό περιεχόμενο, ολοκληρώνοντας αποστολές ή συμμετέχοντας σε ειδικές δραστηριότητες. Συγκεκριμένα άτομα θα έχουν επίσης το δικό τους αποκλειστικό σήμα.
Διευθύνων σύμβουλος

Το CEO Badge ανήκει μόνο στο αφεντικό του Banggood.

Τα σήματα που μπορείτε να κερδίσετε έρχονται σύντομα
  • Εντάξει

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • Εντάξει

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe