Όλα τα μηνύματα

The seller Hello friends, thank you very much for your suggestion. You can click on the link below to purchase a suitable probe. thank you for your support. https://www.banggood.com/search/oscilloscope-probe.html?from=nav

2022-01-13 12:00:13 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: How to measuring range

Ερώτηση από Dipak επί 2022-02-18 02:20:53

BG496521418 If u are referring to the multimeter it is default Auto. Press Auto for Auto or press 'Measure-Range' for manual range. Keep pressing for each scale which will be displayed at top. Select parameter displayed on bottom of display with the F keys.

2022-02-18 09:07:12 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (1)

Ερ: why only one probe for two channels? do you get a high voltage probe?

Ερώτηση από BG611203414 επί 2021-01-16 03:54:49

BG496521418 242 with one 60 MHz probe which is fully insulated. The sockets are also insulated. There are 2 BNC to croc clip probes in the models with signal generator.

2022-02-18 08:59:24 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (5)

Ερ: batterie type are 18V Makita ?

Ερώτηση από BG233216155 επί 2020-08-07 12:56:14

BG496521418 It has 5 Li cells (18650) of 2000 mAH each in series. 48VF is just a deceptive model number written outside. Individual cells can be replaced by direct soldering after filing the surface. The factory way is electric welding 2 spots.

2021-05-21 06:23:19 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (6)

BG496521418 U will need some professional help. Open the can and the top nut for filter connection. The IN pipe has to direct crankcase air down through the brass filter. The Out pipe is directly opening into the body above the baffle plate. Mark IN and OUT pipes. The IN pipe connects to the crankase ventilation hose which will come from the valve cover. The OUT pipe has to go to the air intake pipe. If there are 2 CCV pipes then u need a 3 port catch can. The connected pipes should NEVER kink. If the original pipes have 0.75 inch ID u will need a reducer to 0.5 in. The brass filter should be kept clean w a carb cleaner spray. There should be NO obstruction to flow of air in these pipes.

2021-05-21 05:41:30 Βοηθητικός (3)
υποβάλλουν
Απαντήσεις (2)