Όλα τα μηνύματα

Ερ: what kind of threads do the screws holding the frame have?

Ερώτηση από dvvoin επί 2018-05-09 02:51:49

chicors M3 screws

2021-12-10 05:26:23 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (5)

Ερ: I know it can take a 4s 850mah but what c rating if it’s pulling 100 amps ?

Ερώτηση από dvvoin επί 2019-02-28 07:09:11

Quilling You can use a 70C one.

2019-03-05 04:28:53 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

xiaohui Maybe you can use the "contact us" to contact the banggood customer service team.

2019-03-05 04:47:45 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)
dvvoin 31/01/2019
there are pros and cons pros awesome just awesome frame help up to a really hard crash from the 3rd story of a building it didn’t fall on concrete tho the motors say they are rated for 36 amps and eachine was like Na go big or go home so they put a 45 amp 4-in-1 which is almost as much amps as my 7inch so it’s got a ton of punch I believe on this model 6s is the way to go 5s would work but wouldn’t give you the same experience. Also there is a really nice rebranded hell gate buzzer type board that they used as a layer in a stack in the real and the board is pretty Scott leaving you a very good spot to leave the receiver on the other side there is the newbie drone Bluetooth module which I was just blown away with I’m going to need one of these for every model I fly as it’s very use-full it’s super clean the camera has a good lens and it has a good punch out I’m also aware that the first batch of these quads had death toll issues on 6s well mine doesn’t so I’m really glad cons there are a few things I would change more camera protection because if u hit something straight on at a decent speed that beautiful lens is defiantly going into the sensor another thing about the camera is eachine left the foxear osd on and it overlaps the betaflight one I personally don’t own a controller so I’ll have to figure it out also the arms are stupid complicated to remove as u need to remove the entire main stack to get to the screens not to mention the stack screws go through the arms. the rear stack is awesome but here is no 12v pads to work with which bugs me a lot because I need a free 12v pad also when flying the PID tune kinda sucks it handles well doesn’t flutter to much but when given throttle and let go right away as if u we’re going to do a dive the quad just flails in the air I’m not an expert but I think it needs more I term not sure I’ll experiment with it once bang good finally sends out the receive that’s meant to go inside
0
Συστάσεις
Σχόλια (1)