Όλα τα μηνύματα

Ερ: Do you have it in 110V ?

Ερώτηση από Roberto Garcia επί 2018-09-21 07:27:41

fernandojoaquim3 Thismodel is 220v AC and will not function on 110v AC.

2022-09-30 05:20:39 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Is saw blade included?

Ερώτηση από Ivicae54 επί 2022-01-27 10:22:31

fernandojoaquim3 No,ablade is not included,and is to be purchased separately .Please note spindle size.

2022-09-30 05:17:15 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

fernandojoaquim3 The chuck body on these chucks is not threaded,hence the chuck can be mounted on your MC900 via an adapter plate,bought or fabricated.

2022-05-21 05:37:00 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

fernandojoaquim3 SanOu manufactures chucks in various configurations,these designated by model number.Each model is designed to hold work pieces according to function.K72= 4 jaw INDEPENDENT chuck means you adjust each individual jaw one at a time,therefor used to clamp square or rectangular work pieces at offset (or centralized)positions as well as round stock which the operator will center using a dial gauge.San Ou K-02,K-12 are 4 jaw self-centering chucks.

2022-03-29 05:25:33 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Sono già presenti gli inserti insieme agli steli, oppure bisogna comprarli a parte?

Ερώτηση από Luigi επί 2018-11-19 01:18:55

fernandojoaquim3 Unset di inserti (uno per utensile) viene fornito con il set, tuttavia gli inserti separati dovranno essere acquistati separatamente

2021-12-17 12:42:46 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (5)

Ερ: Can I buy insert retaining screws for these tools?

Ερώτηση από Bluey66 επί 2021-04-19 03:51:27

fernandojoaquim3 Yes,separatereplacement screws are available.Should you have stripped the tool insert threads,simply tap to the next available size thread with an adequately sized tap and obtain matching sized screws.

2021-12-17 12:39:37 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Please verify that the K72-80 chuck has 3 mounting holes on the back with M6 threads. Thanks

Ερώτηση από mhejjas επί 2021-08-13 07:15:03

fernandojoaquim3 TheK72-80 has 3 (three) equal-spaced M6 threaded mounting holes on the rear of the chuck( the unit I received has 3 holes).

2021-12-14 05:01:07 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (3)

Ερ: What is the size of the motor shaft?

Ερώτηση από vellarod επί 2019-04-19 03:44:32

fernandojoaquim3 Motorshaft size on the working(or pinion) end is: length =11,5mm ,, diameter 3.18mm (note that the shaft is beveled,d-shaped),and total motor shaft length = 68.8mm (back to front)

2021-11-19 07:57:24 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

fernandojoaquim3 Thereare many enclosures or casings in which one can mount these units.I recommend using an old or existing halogen floodlight casing(normally a cast aluminium shell with a glass door and seal) ,remove the existing halogen lamp holder etc,and convert it to the led unit.Have done so,the led unit has worked in the casing for close on 2 years....no water ingress problems.

2021-07-13 08:37:38 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Is this a 3 or 5mm shaft for the pinion gear????

Ερώτηση από CantennaB επί 2021-04-27 05:30:52

fernandojoaquim3 Standard3.2 mm motor shaft with flat machined edge ("D" shaped viewed from the front).

2021-07-13 07:39:38 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (4)

Ερ: Can this chuck be used for cutting steel?

Ερώτηση από mrbishop επί 2019-11-02 12:40:09

fernandojoaquim3 Yes,however,notrecommended for clamping steel work-pieces.Likely slippage of a ferrous steel piece in the chuck may result in shearing damage to the chuck jaws. Do so at your own discretion.

2021-07-13 07:39:08 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (3)