Αποστολή προς United Kingdom , USD
Κορυφαία θετική κριτική για %s στο Banggood, Αγοράστε τα καλύτερα %s με τη χαμηλότερη τιμή στο Banggood. Περιηγηθείτε στην πιο χρήσιμη θετική κριτική για το %s πριν αγοράσετε., παιχνίδια rc, διασκεδαστικά σπορ, μόδα, δημοφιλή ηλεκτρονικά
jeever 14/09/2022
The electronics of the GY20451 The version of the GY20451 supplied to us contains only ten electronic parts. Thus, the scheme is quickly reconstructed and worked out in the illustration below. The 12 V supply voltage is converted into 5 Vdc in U1, an AMS1117, to power the microcontroller. Both the input and output of this stabilizer are decoupled with capacitors C5, C1 and C2. LED1 is connected to the 5 V output via the series resistor R1. An STC15W104 is used as microcontroller. It has a built-in clock generator, so no external parts are necessary in this scheme. Two square waves with a frequency of 40 kHz appear at the outputs P3.2 and P3.3. These two signals drive the two inputs of U3, a TCA4427. That is a double 'High-speed Power MOSFET Driver'. The outputs are connected by means of two MOSFETs either to ground or to the 12 V power supply. These two outputs directly feed the two piezoceramic resonators TX1 and TX2.
12
Σχόλια (5)
υποβάλλουν
  • hjlc Did you maga to make it work? Mine appears to have no program in the microprocessor. Did you loaded a program into it?

    Απάντηση 24/09/2022
  • hjlc Assembled, all connectins checked. No 40khz signal out of the STC. It looks like us not programmed. I asked to support and they told me they have no program.

    Απάντηση 24/09/2022
  • hjlc No programming needed?

    Απάντηση 24/09/2022
  • zzzackk thx so much for explaining the schematics to us!!

    Απάντηση 23/01/2023
  • BG252512551 MayI have the mounting layout?

    Απάντηση 20/04/2023
Ερευνα ικανοποίησης

Κατεβάστε την εφαρμογή για να λάβετε ένα αποκλειστικό έκπτωση 10% από το κουπόνι