Συναρμολόγηση γραναζιών διαφορικού Remo P6957 από σιδηροπυριτωδές σκληρυμένο ατσάλι για μοντέλα οχημάτων RC 1621, 1625, 1631, 1635, 1651, 1655 Κριτικές

Συναρμολόγηση γραναζιών διαφορικού Remo P6957 από σιδηροπυριτωδές σκληρυμένο ατσάλι για μοντέλα οχημάτων RC 1621, 1625, 1631, 1635, 1651, 1655

US$11.99
~~US$14.99~~
Αγορασε τωρα

Κριτικές πελατών

4.94 εκτός 5

Δείτε όλες τις κριτικές 48

5 αστέρι
45 (93.8%)
4 αστέρι
3 (6.2%)
3 αστέρι
0 (0%)
2 αστέρι
0 (0%)
1 αστέρι
0 (0%)

Γράψτε μια κριτική Λάβετε διπλούς πόντους κριτικής εάν είστε μία από τις πρώτες 3 κριτικές που δημοσιεύθηκαν!

Όλες οι κριτικές (48)
Εικόνα (11)
Βίντεο (1)
Όλα τα αστέρια
- Όλα τα αστέρια(48)
- 5 αστέρι(45)
- 4 αστέρι(3)
- 3 αστέρι(0)
- 2 αστέρι(0)
- 1 αστέρι(0)

Ταξινόμηση κατά:

Κορυφαία κριτική

Κορυφαία κριτική
Πιο χρήσιμο
Πρόσφατα

Κριτικές μόνο από τη χώρα σας (Greece)

Εμφάνιση πρωτότυπου

Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.

mmihelicVIP4
SI
18/11/2020

I bought two pieces. One runs relatively smooth, while the other one grinds a bit. Both have a bit of some transparent runny grease in them. Both will need to be cleaned and re-greased. One screw head was almost stripped, had to take great care with unscrewing it. One diff cup only has a groove for the dogbone pins and is not punched through like the others. Both stock ones were also missing a screw that should fix the cup to the internal gear. I wonder if theese two have the same issue. We will just have to see how the diffs work out.

I bought two pieces. One runs relatively smooth, while the other one grinds a bit. Both have a bit of some transparent runny grease in them. Both will need to be cleaned and re-greased. One screw head was almost stripped, had to take great care with unscrewing it. One diff cup only has a groove for the dogbone pins and is not punched through like the others. Both stock ones were also missing a screw that should fix the cup to the internal gear. I wonder if theese two have the same issue. We will just have to see how the diffs work out.

I bought two pieces. One runs relatively smooth, while the other one grinds a bit. Both have a bit of some transparent runny grease in them. Both will need to be cleaned and re-greased. One screw head was almost stripped, had to take great care with unscrewing it. One diff cup only has a groove for the dogbone pins and is not punched through like the others. Both stock ones were also missing a screw that should fix the cup to the internal gear. I wonder if theese two have the same issue. We will just have to see how the diffs work out.
3

Σχόλια

Εμφάνιση πρωτότυπου
Wiktor79VIP2
PL
10/05/2019

Very very good. It works smoothly.You must have this!!!

Very very good. It works smoothly.You must have this!!!

Very very good. It works smoothly.You must have this!!!
1

Σχόλια

Εμφάνιση πρωτότυπου