Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.
So far I like this iron handle a little more than the one that came with my T12 station. I'll start by talking about some issues I had with it. When this handle arrived, the connector's strain relief was not connected at all. The two screws were loose in the bag, so you might want to watch out for that. All of the handle components were also loose, so those may need to be tightened up. I also find that this handle sometimes gets pretty hot. Considering the standby feature, this probably wouldn't normally be a big deal, but the standby switch is VERY sensitive, so even bumping the table will bring the iron out of standby mode. All of that being said, you can see in the picture that the distance from the grip to the iron tip is less than half of the distance for the standard handle. I think this is much more comfortable to use, so for the price I think it's definitely worthwhile
Καλή ποιότητα για την διαδικασία.
Γρήγορη αποστολή, εξαιρετική ποιότητα!
Πολύ γρήγορη παράδοση. Φαίνεται ωραίο, δεν έχει δοκιμαστεί ακόμα
Short distance to soldering iron tip means that sometimes it can be unconfortable to hold. Good for very fine work.
It's a very good replacement for the 907 handle. You can grab the handle much closer to object which give you a better feeling. You can also switch the tips during operation. Be careful if you have your soldering iron heating for a long time in the station stand, the rubber at the top of the handle can become very hot!
Ευτυχισμένη με το σίδερο Λειτουργεί καλά με το συγκολλητικό σταθμό Ο μόλυβδος είναι ωραίος και μαλακός και καλό μήκος. (θα μπορούσε να κάνει με κάποια ανακούφιση από την άκρη της λαβής όπως η δική μου δεν είχε καθόλου) Πολύ πιο γρήγορα να ανταλλάξουμε συμβουλές - και δεν είχε το χερούλι να πάρει ζεστό όπως άλλοι είπαν ότι θα μπορούσε Τα φιλοδωρήματα είναι αρκετά ασφαλή και η ηλεκτρική επαφή φαίνεται καλή
Έφτασε πολύ γρήγορα και σε καλή συσκευασία. Η λαβή είναι πολύ καλή και δουλεύει τέλεια με τον σταθμό συγκόλλησης Κsger Τ12. Έχει μακρύ καλώδιο από σιλικόνη 1M και το μπροστινό βύσμα πολύ καλά και δεν είναι καθόλου χαλαρό. μετά από μία ώρα χρήσης, η θερμότητα συσσωρεύεται ελάχιστα στη λαβή. και ταιριάζει καλά στο στάνταρ μου Hakko περίπτερο...
Αν αγοράζετε το σταθμό συγκόλλησης T12 αυτή η λαβή είναι απαραίτητη για τη χρήση λεπτών ακροστόλων και SMD και θα επιτρέψει στα δάχτυλά σας να κρατούν τη λαβή πολύ πιο κοντά στη δουλειά.
Σούπερ