I bought this to build my own FPV EGG Pro with pretty much all the parts that come with the retail version. I used the 20A LDARC flight stack and the LDARC branded Sunnysky motors with a Runcam micro swift and VTX03. It has a very thick bottom plate should hold up well in crashes! Unrelated to the frame but this may help some people when you connect the motor wires directly in order to the ESC’s in the LDARC flight stack you have to recerse motor 2 and 3 in BLHeli or just switch any two wires on each motor when you’re soldering. Also the motor wires on the King Kong branded Sunnysky motors that are sold as a spare part for this drone are not silicone and are too short to reach the front two pads of the ESC you will have to extend them the back ones just fit. Anyway the frame is great! I recommend it for an awesome 3” build.

I bought this to build my own FPV EGG Pro with pretty much all the parts that come with the retail version. I used the 20A LDARC flight stack and the LDARC branded Sunnysky motors with a Runcam micro swift and VTX03. It has a very thick bottom plate should hold up well in crashes! Unrelated to the frame but this may help some people when you connect the motor wires directly in order to the ESC’s in the LDARC flight stack you have to recerse motor 2 and 3 in BLHeli or just switch any two wires on each motor when you’re soldering. Also the motor wires on the King Kong branded Sunnysky motors that are sold as a spare part for this drone are not silicone and are too short to reach the front two pads of the ESC you will have to extend them the back ones just fit. Anyway the frame is great! I recommend it for an awesome 3” build.

I bought this to build my own FPV EGG Pro with pretty much all the parts that come with the retail version. I used the 20A LDARC flight stack and the LDARC branded Sunnysky motors with a Runcam micro swift and VTX03. It has a very thick bottom plate should hold up well in crashes! Unrelated to the frame but this may help some people when you connect the motor wires directly in order to the ESC’s in the LDARC flight stack you have to recerse motor 2 and 3 in BLHeli or just switch any two wires on each motor when you’re soldering. Also the motor wires on the King Kong branded Sunnysky motors that are sold as a spare part for this drone are not silicone and are too short to reach the front two pads of the ESC you will have to extend them the back ones just fit. Anyway the frame is great! I recommend it for an awesome 3” build.

Η αγαπημένη μου κορνίζα, έχω 3. Πολύ ανθεκτική. Με πολύ καλές συστάσεις.

My favorite frame, i have 3. Very durable. highly recommend.

Η αγαπημένη μου κορνίζα, έχω 3. Πολύ ανθεκτική. Με πολύ καλές συστάσεις.

Ürün gayet sağlam ve şık. paketin içinden montaj için proje veya yardımcı katalog olsa daha iyi olurdu.

Ürün gayet sağlam ve şık. paketin içinden montaj için proje veya yardımcı katalog olsa daha iyi olurdu.

Ürün gayet sağlam ve şık. paketin içinden montaj için proje veya yardımcı katalog olsa daha iyi olurdu.

Nice frame , sturdy and takes a beating

Nice frame , sturdy and takes a beating

Nice frame , sturdy and takes a beating

nice frame! looks very tough

nice frame! looks very tough

nice frame! looks very tough

top

top

top

Very well made in a good kit. Everything supplied LED Props etc. Frame is 4mm super thick for such a small frame should take some beating.

Very well made in a good kit. Everything supplied LED Props etc. Frame is 4mm super thick for such a small frame should take some beating.

Very well made in a good kit. Everything supplied LED Props etc. Frame is 4mm super thick for such a small frame should take some beating.

OK

OK

OK