estupenda controladora para mis racers solo tiene un fallo reconocido que es que la telemetría en algunas controladoras no va con smarport a no ser que metas esta comando en cli de betaflight.

estupenda controladora para mis racers solo tiene un fallo reconocido que es que la telemetría en algunas controladoras no va con smarport a no ser que metas esta comando en cli de betaflight.

estupenda controladora para mis racers solo tiene un fallo reconocido que es que la telemetría en algunas controladoras no va con smarport a no ser que metas esta comando en cli de betaflight.

The design/layout of this flight controller is very good compared to some other F4 controller. Because of the soft mounted gyro you need some more space in height. In my case the telemetry port was not working. So iam using UART6 for frsky telemetry. But make sure to check out this better alternative F4 AIO FC >>> https://bit.ly/mF4aio

The design/layout of this flight controller is very good compared to some other F4 controller. Because of the soft mounted gyro you need some more space in height. In my case the telemetry port was not working. So iam using UART6 for frsky telemetry. But make sure to check out this better alternative F4 AIO FC >>> https://bit.ly/mF4aio

The design/layout of this flight controller is very good compared to some other F4 controller. Because of the soft mounted gyro you need some more space in height. In my case the telemetry port was not working. So iam using UART6 for frsky telemetry. But make sure to check out this better alternative F4 AIO FC >>> https://bit.ly/mF4aio

Pas encore essayé mais prometteur belle carte largeur maîtriser longueur plus élevé c'est normal du au pad de la PdB le poids est de 9,3 grammes pas de 7 g

Pas encore essayé mais prometteur belle carte largeur maîtriser longueur plus élevé c'est normal du au pad de la PdB le poids est de 9,3 grammes pas de 7 g

Pas encore essayé mais prometteur belle carte largeur maîtriser longueur plus élevé c'est normal du au pad de la PdB le poids est de 9,3 grammes pas de 7 g

Very nice all in one FC with Soft-mount gyro (2 additional foam for gyro in package and cable for gyro) FC covered with a protective coating

Very nice all in one FC with Soft-mount gyro (2 additional foam for gyro in package and cable for gyro) FC covered with a protective coating

Very nice all in one FC with Soft-mount gyro (2 additional foam for gyro in package and cable for gyro) FC covered with a protective coating

This one is tiny and a pair of steady hands are expected especially if you where unfortunate enough to replace the ribbon cable. See the attached images for size comparison. Good luck. Next up is reading Joshua Bardwell contribution manual. Btw banggood thanks for ultra fast shipping only 7 days delivery thats a record. For more info see: https://youtu.be/wwOwja_jOzM Happy building

This one is tiny and a pair of steady hands are expected especially if you where unfortunate enough to replace the ribbon cable. See the attached images for size comparison. Good luck. Next up is reading Joshua Bardwell contribution manual. Btw banggood thanks for ultra fast shipping only 7 days delivery thats a record. For more info see: https://youtu.be/wwOwja_jOzM Happy building

This one is tiny and a pair of steady hands are expected especially if you where unfortunate enough to replace the ribbon cable. See the attached images for size comparison. Good luck. Next up is reading Joshua Bardwell contribution manual. Btw banggood thanks for ultra fast shipping only 7 days delivery thats a record. For more info see: https://youtu.be/wwOwja_jOzM Happy building

This FC is really good. Since the IMU sits on top of the board on some foam, there is no need for soft mounting of the whole FC. Everything works without tweeking. The SBUS and S.PORT connections are allready inverted so there is no hack needed on the receiver (like on other F4 FCs). I run mine on 8kHz/8kHz with DSHOT600 and filters turned on. It flies very well right out of the box. PID and VTX adjustment from my taranis works great. Even the camera OSD can be controlled from the transmitter. The manual explains all very understandabel. It would be very nice if the camera_control function would be described in the manual too.

This FC is really good. Since the IMU sits on top of the board on some foam, there is no need for soft mounting of the whole FC. Everything works without tweeking. The SBUS and S.PORT connections are allready inverted so there is no hack needed on the receiver (like on other F4 FCs). I run mine on 8kHz/8kHz with DSHOT600 and filters turned on. It flies very well right out of the box. PID and VTX adjustment from my taranis works great. Even the camera OSD can be controlled from the transmitter. The manual explains all very understandabel. It would be very nice if the camera_control function would be described in the manual too.

This FC is really good. Since the IMU sits on top of the board on some foam, there is no need for soft mounting of the whole FC. Everything works without tweeking. The SBUS and S.PORT connections are allready inverted so there is no hack needed on the receiver (like on other F4 FCs). I run mine on 8kHz/8kHz with DSHOT600 and filters turned on. It flies very well right out of the box. PID and VTX adjustment from my taranis works great. Even the camera OSD can be controlled from the transmitter. The manual explains all very understandabel. It would be very nice if the camera_control function would be described in the manual too.

I got this Kakute F4 AIO v2 for my upcoming 6S build because this board supports up to 6S, has built in ODS and PDB (up to 120A), and according to the manual it has 5V, up to 1,5A BEC which should power receiver, FPV cam and VTX (even a high-powered VTX like the Unify Pro) When I am already mentioning the manual: Congrats Kakute on awesome manual!!! Whish more RC electronic components would come with this high level manuals. For sure, there would be less white smoke flavored PCBs and hours wasted on figuring how to connect or configure boards. My full review is here: https://www.rcgroups.com/forums/showthread.php?3088497-Review-%28ip%29-of-Holybro-Kakute-F4-AIO-V2-FC-STM32-F405-MCU-ODS-PDB

I got this Kakute F4 AIO v2 for my upcoming 6S build because this board supports up to 6S, has built in ODS and PDB (up to 120A), and according to the manual it has 5V, up to 1,5A BEC which should power receiver, FPV cam and VTX (even a high-powered VTX like the Unify Pro) When I am already mentioning the manual: Congrats Kakute on awesome manual!!! Whish more RC electronic components would come with this high level manuals. For sure, there would be less white smoke flavored PCBs and hours wasted on figuring how to connect or configure boards. My full review is here: https://www.rcgroups.com/forums/showthread.php?3088497-Review-%28ip%29-of-Holybro-Kakute-F4-AIO-V2-FC-STM32-F405-MCU-ODS-PDB

I got this Kakute F4 AIO v2 for my upcoming 6S build because this board supports up to 6S, has built in ODS and PDB (up to 120A), and according to the manual it has 5V, up to 1,5A BEC which should power receiver, FPV cam and VTX (even a high-powered VTX like the Unify Pro) When I am already mentioning the manual: Congrats Kakute on awesome manual!!! Whish more RC electronic components would come with this high level manuals. For sure, there would be less white smoke flavored PCBs and hours wasted on figuring how to connect or configure boards. My full review is here: https://www.rcgroups.com/forums/showthread.php?3088497-Review-%28ip%29-of-Holybro-Kakute-F4-AIO-V2-FC-STM32-F405-MCU-ODS-PDB

Sin duda, la mejor todo en uno que he probado, por encima de cualquier matek o parecidas. Gran calidad, acabados y fiabilidad. Aconsejable 100%. La tengo en dos drones y van estupendamente.

Sin duda, la mejor todo en uno que he probado, por encima de cualquier matek o parecidas. Gran calidad, acabados y fiabilidad. Aconsejable 100%. La tengo en dos drones y van estupendamente.

Sin duda, la mejor todo en uno que he probado, por encima de cualquier matek o parecidas. Gran calidad, acabados y fiabilidad. Aconsejable 100%. La tengo en dos drones y van estupendamente.

This is the best BF - F4 controller you can buy! amazing support and manual, superb smoothness when flying! Some issues with the current sensor that reads no more than 60Amps but thats not a serious issue

This is the best BF - F4 controller you can buy! amazing support and manual, superb smoothness when flying! Some issues with the current sensor that reads no more than 60Amps but thats not a serious issue

This is the best BF - F4 controller you can buy! amazing support and manual, superb smoothness when flying! Some issues with the current sensor that reads no more than 60Amps but thats not a serious issue

Sweet locking FC with a nice layout. Mine came in a damaged bag with a smashed box. Think the micro usb got a ding but was able to straighten it out with the plug in it. Soldered up nice and easy. Would not recommend for newbs sins the pads are a bit smale. Came with BF 3.2 on it. Can't wait to test! All in all perfect for my armattan build. Recommend!

Sweet locking FC with a nice layout. Mine came in a damaged bag with a smashed box. Think the micro usb got a ding but was able to straighten it out with the plug in it. Soldered up nice and easy. Would not recommend for newbs sins the pads are a bit smale. Came with BF 3.2 on it. Can't wait to test! All in all perfect for my armattan build. Recommend!

Sweet locking FC with a nice layout. Mine came in a damaged bag with a smashed box. Think the micro usb got a ding but was able to straighten it out with the plug in it. Soldered up nice and easy. Would not recommend for newbs sins the pads are a bit smale. Came with BF 3.2 on it. Can't wait to test! All in all perfect for my armattan build. Recommend!