BG164721165 In picture 5, did you have to completely remove the whole Hongdui assembly in order to fold over the fence extension and then refit the Hongdui?
Απάντηση 18/01/2021BG127173891 Hi Paul, really interested in these myself as have a DeWalt DW745 myself and looked at the Jessem but as you rightly said bloody expensive when you take everything into account. however after using these ones have you found they work well? Also what height of wood can you use with these. finally I notice you have a nice zero clearance insert. where did you get it from if you don’t mind me asking? . thanks Mark
Απάντηση 18/01/2021paultaylor1169 @BG164721165 Onlyjust seen this...yes you are correct, i did remove to fold over the fence extension.
Απάντηση 07/12/2022paultaylor1169 @BG127173891 HiMark. Only just seen this. I am well impressed with this and it was quite easy to get it to fit... I reckon you can 100mm underneath the guides. I made the zero insert myself. I now have 4 others foruse with different blades.. see my Insta site for a better view. https://www.instagram.com/taylormadebypaul/
Απάντηση 07/12/2022erdos4029 Ilike this solution! But! check out this google translation! "I saw the JESSEM Clear Cut TS Stock Guide-for Table Saw on YouTube about these large Dan pattern table saws and thought they would be good to use to stop bribes and keep the wood tight for the fence... Then I saw these HONGDUI s on Banggood for around 12 off the price for around 160. The quality looked about the same ie. excellent. I have a Dewalt DW745 table saw and was confident that with a little modification I could make it fit my house. A piece of 3 x 2 epoxy to the inner surface of the fence and I was ready to install, one piece of aluminum T Track approx. I had to shorten it by 150mm before screwing it to the fence, taking care to clear the face of the fence. Here are some photos of the finished installation... To be honest it works but I haven't used it with large pieces of cloth but I expect it will help keep the wood tight to the fence. The subject of this post is to modify the fence to fit a DW745 dew"
Απάντηση 10/02/2023BG022356551 i have the same DeWalt table saw i just replaced my fence with aluminum extrusion because the fence is crap anyway.
Απάντηση 31/03/2023Η ΕΤΑΙΡΕΙΑ μας | Επικοινωνήστε μαζί μας | Πληρωμή & αποστολή | Προγράμματα Συνεργασίας |
---|---|---|---|