I bought the FlySky FS-i6 for all my 10 drones. It supported the old AFHDS protocol for using mini RX receiver (DasMikro Ultra Miniature) and with AFHDS 2A I'm using all my RX receiver FS-iA6B. It come with USB cable for flashing or training on PC. The transmitter ist for beginner and for advanced aviators. With iBUS protocol you can use all the 4 buttons and two variable buttons on your quadcopter. Low cost and very, very good.

I bought the FlySky FS-i6 for all my 10 drones. It supported the old AFHDS protocol for using mini RX receiver (DasMikro Ultra Miniature) and with AFHDS 2A I'm using all my RX receiver FS-iA6B. It come with USB cable for flashing or training on PC. The transmitter ist for beginner and for advanced aviators. With iBUS protocol you can use all the 4 buttons and two variable buttons on your quadcopter. Low cost and very, very good.

I bought the FlySky FS-i6 for all my 10 drones. It supported the old AFHDS protocol for using mini RX receiver (DasMikro Ultra Miniature) and with AFHDS 2A I'm using all my RX receiver FS-iA6B. It come with USB cable for flashing or training on PC. The transmitter ist for beginner and for advanced aviators. With iBUS protocol you can use all the 4 buttons and two variable buttons on your quadcopter. Low cost and very, very good.

Fonctionne très bien, je l'utilise en I-bus sur une SP F3 racing de chez Bangood. A savoir : bien que vendues ensemble, il faut binder le récepteur avec la radio!

Fonctionne très bien, je l'utilise en I-bus sur une SP F3 racing de chez Bangood. A savoir : bien que vendues ensemble, il faut binder le récepteur avec la radio!

Fonctionne très bien, je l'utilise en I-bus sur une SP F3 racing de chez Bangood. A savoir : bien que vendues ensemble, il faut binder le récepteur avec la radio!

Great Transmitter! Great Price! It was a bit of a challenge, as a newbie, to get all 10 channels to be enabled with the FS-A8S receiver. No firmware update is needed! I used two 16 channel converter modules, S2PW's, (each only has 8 outputs configurable for channels 1-8 (no red light) or 9-16 (red light active). The converter modules are setup, factory stock, to be channels 1-8. To enable channels 9-16 you need to press the button and hold it in while powering on those modules, then release. This only needs to be done once and they save their settings. The FS-A8S needs to be connected to the i.BUS input of the S2PW module configured for channels 9-16 (red light) when using more than 8 channels. The module, with the red lights output needs to be connected to the input of the second S2PW module configured as Channels 1-8 (no red light). At first, I had the A8S connected to the channel 1-8 module (no red light) and it did not allow channels 9-10 to get through to the second module. I then connected the A8S to the channel 9-16 module (red light) and everything works as expected with the 10 Channels of this radio. I included a Photo with how I set this up, the yellow wire between the two S2PW modules is the i.BUS signal. Red and black wires are power and ground wires. The transmitter "RX Mode" settings need to be set to output PPM on i.BUS. You also need to turn on all the AUX Switches. Save all settings and go into the "Display" mode of the transmitter, press UP/DOWN buttons to view channels 8-10. There is also a much more detailed manual on the manufacture website product page, there is no need to update the firmware to enable 10 channels and it may actually downgrade your radio to older firmware.

Great Transmitter! Great Price! It was a bit of a challenge, as a newbie, to get all 10 channels to be enabled with the FS-A8S receiver. No firmware update is needed! I used two 16 channel converter modules, S2PW's, (each only has 8 outputs configurable for channels 1-8 (no red light) or 9-16 (red light active). The converter modules are setup, factory stock, to be channels 1-8. To enable channels 9-16 you need to press the button and hold it in while powering on those modules, then release. This only needs to be done once and they save their settings. The FS-A8S needs to be connected to the i.BUS input of the S2PW module configured for channels 9-16 (red light) when using more than 8 channels. The module, with the red lights output needs to be connected to the input of the second S2PW module configured as Channels 1-8 (no red light). At first, I had the A8S connected to the channel 1-8 module (no red light) and it did not allow channels 9-10 to get through to the second module. I then connected the A8S to the channel 9-16 module (red light) and everything works as expected with the 10 Channels of this radio. I included a Photo with how I set this up, the yellow wire between the two S2PW modules is the i.BUS signal. Red and black wires are power and ground wires. The transmitter "RX Mode" settings need to be set to output PPM on i.BUS. You also need to turn on all the AUX Switches. Save all settings and go into the "Display" mode of the transmitter, press UP/DOWN buttons to view channels 8-10. There is also a much more detailed manual on the manufacture website product page, there is no need to update the firmware to enable 10 channels and it may actually downgrade your radio to older firmware.

Great Transmitter! Great Price! It was a bit of a challenge, as a newbie, to get all 10 channels to be enabled with the FS-A8S receiver. No firmware update is needed! I used two 16 channel converter modules, S2PW's, (each only has 8 outputs configurable for channels 1-8 (no red light) or 9-16 (red light active). The converter modules are setup, factory stock, to be channels 1-8. To enable channels 9-16 you need to press the button and hold it in while powering on those modules, then release. This only needs to be done once and they save their settings. The FS-A8S needs to be connected to the i.BUS input of the S2PW module configured for channels 9-16 (red light) when using more than 8 channels. The module, with the red lights output needs to be connected to the input of the second S2PW module configured as Channels 1-8 (no red light). At first, I had the A8S connected to the channel 1-8 module (no red light) and it did not allow channels 9-10 to get through to the second module. I then connected the A8S to the channel 9-16 module (red light) and everything works as expected with the 10 Channels of this radio. I included a Photo with how I set this up, the yellow wire between the two S2PW modules is the i.BUS signal. Red and black wires are power and ground wires. The transmitter "RX Mode" settings need to be set to output PPM on i.BUS. You also need to turn on all the AUX Switches. Save all settings and go into the "Display" mode of the transmitter, press UP/DOWN buttons to view channels 8-10. There is also a much more detailed manual on the manufacture website product page, there is no need to update the firmware to enable 10 channels and it may actually downgrade your radio to older firmware.

1. cheap; 2. popular; 3. w/ i-bus included; 4.up-gradable (antenna/battery/firmware); 5. responsive; 6. even skins are available for this one!... It deserves to be choosen.

1. cheap; 2. popular; 3. w/ i-bus included; 4.up-gradable (antenna/battery/firmware); 5. responsive; 6. even skins are available for this one!... It deserves to be choosen.

1. cheap; 2. popular; 3. w/ i-bus included; 4.up-gradable (antenna/battery/firmware); 5. responsive; 6. even skins are available for this one!... It deserves to be choosen.

Calidad aceptable, no parece de juguete, pero por el precio, bien adecuado para los que iniciamos en el RC, tardó menos de lo que se decía la principio, hasta 15 días, espero poder usarlo pronto, pero con prácticas suficientes! 😊

Calidad aceptable, no parece de juguete, pero por el precio, bien adecuado para los que iniciamos en el RC, tardó menos de lo que se decía la principio, hasta 15 días, espero poder usarlo pronto, pero con prácticas suficientes! 😊

Calidad aceptable, no parece de juguete, pero por el precio, bien adecuado para los que iniciamos en el RC, tardó menos de lo que se decía la principio, hasta 15 días, espero poder usarlo pronto, pero con prácticas suficientes! 😊

ürün açıklamasında yazdığı gibi geldi. bu mesajı Türk kullanıcılar için yazıyorum. Gönül rahatlığı ile alabilirsiniz.

ürün açıklamasında yazdığı gibi geldi. bu mesajı Türk kullanıcılar için yazıyorum. Gönül rahatlığı ile alabilirsiniz.

ürün açıklamasında yazdığı gibi geldi. bu mesajı Türk kullanıcılar için yazıyorum. Gönül rahatlığı ile alabilirsiniz.

Αν ληφθεί σε χρόνο και μορφή, η ποιότητα των υλικών είναι καλή, δεν θα έλεγα εξαιρετική, αλλά επειδή η τιμή είναι υπεραρκετή, εξακολουθώ να μην τη γευτώ πραγματικά, περιμένω άλλο άρθρο να δοκιμάσει, αλλά εκτιμάται περισσότερο από καλό, ευχαριστώ Μπανγκουντ

Recibido en tiempo y forma, la calidad de los materiales es buena, no diria excelente pero por el precio es mas que suficiente, aun no lo pruebo realmente, estoy en espera de otro artículo para probar, pero se aprecia mas que bien, gracias bangood

Αν ληφθεί σε χρόνο και μορφή, η ποιότητα των υλικών είναι καλή, δεν θα έλεγα εξαιρετική, αλλά επειδή η τιμή είναι υπεραρκετή, εξακολουθώ να μην τη γευτώ πραγματικά, περιμένω άλλο άρθρο να δοκιμάσει, αλλά εκτιμάται περισσότερο από καλό, ευχαριστώ Μπανγκουντ

Τέλειο! Το δέμα είναι λίγο κατεστραμμένο, αλλά οι ταχυδρομικές υπηρεσίες δεν είναι προσεκτικές αν δεν λειτουργούν τέλεια. Κρίμα που λείπει ένα εγχειρίδιο για τον παραλήπτη fs x6b, αλλά θα πρέπει να το βρείτε στο διαδίκτυο. δεν μπορούσε να δοκιμάσει τον δέκτη ακόμα. Προτείνω αυτό να είναι ένα καλό σύνολο για αυτό που εκτοξεύτηκε στο Fpv και να καταλάβουμε πώς να συνδέσουμε έναν πραγματικό δέκτη που φαίνεται πραγματικά πιο ισχυρό από τα FSA8.

parfait ! colis un peu abimé mais sa c'est les services postaux qui son pas soigneux sinon marche parfaitement ce qui est dommage c'est qui manque un manuel ( même en anglais) pour le récepteur fs x6b avec mais sa devrai ce trouvé sur internet, du coup, pas pu essayer le récepteurs encore . je recommande c'est un super ensemble pour ce lancé dans le fpv et comprendre comment raccorder un vrai récepteur qui a l'air vraiment plus puissant que le fsa8s.

Τέλειο! Το δέμα είναι λίγο κατεστραμμένο, αλλά οι ταχυδρομικές υπηρεσίες δεν είναι προσεκτικές αν δεν λειτουργούν τέλεια. Κρίμα που λείπει ένα εγχειρίδιο για τον παραλήπτη fs x6b, αλλά θα πρέπει να το βρείτε στο διαδίκτυο. δεν μπορούσε να δοκιμάσει τον δέκτη ακόμα. Προτείνω αυτό να είναι ένα καλό σύνολο για αυτό που εκτοξεύτηκε στο Fpv και να καταλάβουμε πώς να συνδέσουμε έναν πραγματικό δέκτη που φαίνεται πραγματικά πιο ισχυρό από τα FSA8.

Very good 2,4 GHz 6-10 ch transmitter for my planes. With altitude and voltage sensors you could monitor how high is the plane and capacity of the battery. And if you update software, you could monitor RSSI.

Very good 2,4 GHz 6-10 ch transmitter for my planes. With altitude and voltage sensors you could monitor how high is the plane and capacity of the battery. And if you update software, you could monitor RSSI.

Very good 2,4 GHz 6-10 ch transmitter for my planes. With altitude and voltage sensors you could monitor how high is the plane and capacity of the battery. And if you update software, you could monitor RSSI.

Επιθυμητό χαρακτηριστικό σε λογική τιμή

İstenilen özellikte uygun fiyata

Επιθυμητό χαρακτηριστικό σε λογική τιμή