Αποστολή προς United Kingdom , USD
Κορυφαία θετική κριτική για %s στο Banggood, Αγοράστε τα καλύτερα %s με τη χαμηλότερη τιμή στο Banggood. Περιηγηθείτε στην πιο χρήσιμη θετική κριτική για το %s πριν αγοράσετε., παιχνίδια rc, διασκεδαστικά σπορ, μόδα, δημοφιλή ηλεκτρονικά
JPDuhen 11/01/2019
To flash, connect GPIO0 and GPIO2 to GND, remove the camera, power it with 3.3V, not 5V. The board needs to be programmed with ESP-IDF as explained in details in Github, https://github.com/donny681/ESP32_CAMERA_QR and there’s no Arduino IDE support. So if you’r not comfortable with using Espressif development framework better skip this board. The demo code takes a QR code, and outputs it as ASCII code in the serial console.
8
Σχόλια (1)
υποβάλλουν
  • Mark Hurley Ihad to power it with 5V to get the camera working properly. And this is compatible with Arduino IDE -- just be sure to add ESP setup beforehand.

    Απάντηση 08/05/2019
Ερευνα ικανοποίησης

Κατεβάστε την εφαρμογή για να λάβετε ένα αποκλειστικό έκπτωση 10% από το κουπόνι