Πολύ καλά 😀

Very good 😀

Πολύ καλά 😀

Item received on time and as specified in description. Fun and easy to assemble and works well.

Item received on time and as specified in description. Fun and easy to assemble and works well.

Item received on time and as specified in description. Fun and easy to assemble and works well.

it is very small circuit and powerful. Good product for experiment

it is very small circuit and powerful. Good product for experiment

it is very small circuit and powerful. Good product for experiment

Παραδόθηκε μέρες πριν την αναμενόμενη ημέρα. σε πλαστική σακούλα χωρίς άλλη προστασία. Αλλά όλα τα κομμάτια είναι σε τίποτα δεν λείπει. Δεν συναρμολογήθηκαν ακόμα.

Delivered days before expected day. in a plastic bag without an other protection. But all pieces are in nothing is missing.Not assembled yet.

Παραδόθηκε μέρες πριν την αναμενόμενη ημέρα. σε πλαστική σακούλα χωρίς άλλη προστασία. Αλλά όλα τα κομμάτια είναι σε τίποτα δεν λείπει. Δεν συναρμολογήθηκαν ακόμα.

πολύ καλό προϊόν, αξίζει τα χρήματα, εύκολο στη χρήση, εξαρτήματα συγκόλλησης δεν είναι τόσο δύσκολο όσο νόμιζα 😎🤟

very good product, worth the money, easy to use, soldering components is not too difficult as I thought 😎🤟

πολύ καλό προϊόν, αξίζει τα χρήματα, εύκολο στη χρήση, εξαρτήματα συγκόλλησης δεν είναι τόσο δύσκολο όσο νόμιζα 😎🤟

Τέλεια!

Great!

Τέλεια!

Great DIY and easy to assemble ARC lighter. Seems to work fine with surprisingly hi output, capable of producing arc across about 5mm gap (have not tried extreme or it may damage something) Draws about 2.5 A from 5V source, current will increase with smaller arc gap (and so will the frequency of the oscillator). Now I am thinking what case to install it in and rechargeable power source for it...

Great DIY and easy to assemble ARC lighter. Seems to work fine with surprisingly hi output, capable of producing arc across about 5mm gap (have not tried extreme or it may damage something) Draws about 2.5 A from 5V source, current will increase with smaller arc gap (and so will the frequency of the oscillator). Now I am thinking what case to install it in and rechargeable power source for it...

Great DIY and easy to assemble ARC lighter. Seems to work fine with surprisingly hi output, capable of producing arc across about 5mm gap (have not tried extreme or it may damage something) Draws about 2.5 A from 5V source, current will increase with smaller arc gap (and so will the frequency of the oscillator). Now I am thinking what case to install it in and rechargeable power source for it...

bought 2 of them and neither one worked

bought 2 of them and neither one worked

bought 2 of them and neither one worked

Simple little soldering project that took just a few minutes to complete - worked first time. The kit is supplied without instructions, and mostly it's possible to figure out where things go. The most confusing item is the actual spark generator (potted coil). There are two insulated wires, and then a number of thinner enamel coated wires. At first glance the enamel coated wires look mixed up, but they are actually soldered at the ends. I placed this unit on the board with the insulated wires nearest the board, and then simply soldered the enamel coated wires to the 3 holes, in the order that they came out of the component. I didn't shorten them to avoid having to remove the enamel and instead joined them on the lower surface as I anticipated perhaps changing the order, and squeezed the excess length of enamel coated wires into a little bundle - it worked first time for me - I'll move the wires to the upper surface if I can be bothered.

Simple little soldering project that took just a few minutes to complete - worked first time. The kit is supplied without instructions, and mostly it's possible to figure out where things go. The most confusing item is the actual spark generator (potted coil). There are two insulated wires, and then a number of thinner enamel coated wires. At first glance the enamel coated wires look mixed up, but they are actually soldered at the ends. I placed this unit on the board with the insulated wires nearest the board, and then simply soldered the enamel coated wires to the 3 holes, in the order that they came out of the component. I didn't shorten them to avoid having to remove the enamel and instead joined them on the lower surface as I anticipated perhaps changing the order, and squeezed the excess length of enamel coated wires into a little bundle - it worked first time for me - I'll move the wires to the upper surface if I can be bothered.

Simple little soldering project that took just a few minutes to complete - worked first time. The kit is supplied without instructions, and mostly it's possible to figure out where things go. The most confusing item is the actual spark generator (potted coil). There are two insulated wires, and then a number of thinner enamel coated wires. At first glance the enamel coated wires look mixed up, but they are actually soldered at the ends. I placed this unit on the board with the insulated wires nearest the board, and then simply soldered the enamel coated wires to the 3 holes, in the order that they came out of the component. I didn't shorten them to avoid having to remove the enamel and instead joined them on the lower surface as I anticipated perhaps changing the order, and squeezed the excess length of enamel coated wires into a little bundle - it worked first time for me - I'll move the wires to the upper surface if I can be bothered.

Produkt zgodny z opisem. Dobrze zapakowany.To kolejny z gadżetów który kupuje dla zabawy ojca z córką. Polecam

Produkt zgodny z opisem. Dobrze zapakowany.To kolejny z gadżetów który kupuje dla zabawy ojca z córką. Polecam

Produkt zgodny z opisem. Dobrze zapakowany.To kolejny z gadżetów który kupuje dla zabawy ojca z córką. Polecam