DT-8806C Non Contact Body IR Laser Infrared Digital Thermometer Gun
Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.
Ottimo prodotto, ma bisogna attenersi alla taratura iniziale prima di usarlo! Se nò segnalerà temperature sbagliate: 1° fase: prendere la temperatura di una persona utilizzando un termometro convenzionale: si otterrà 37,5 ° C per esempio. 2° fase: prendere la temperatura della stessa persona con questo termometro mantenendo i 5 cm di distanza tra il termometro e la fronte. Se si ottiene 37,5 ° C, il termometro è pronto per l’uso. Se si ottiene invece una temperatura minore, 36,4 ° C, ad esempio, la differenza è 1,1 °C. Si deve quindi regolare la temperatura sul termometro ad infrarossi e aggiungere la differenza, (1,1 ° C) Per farlo, premere il pulsante "MODE" per 3 secondi, lo schermo visualizza F1, premere "UP" fino a ottenere F2, premere il tasto "MODE" di nuovo fino ad ottenere 0.0. premere "UP", e aggiungere la differenza nel nostro esempio, 1,1 ° C. 3° fase: per controllare, prendere la temperatura di nuovo utilizzando il termometro a infrarossi. Ottimo acquisto!!
This unit is OK for the designed working : Body The "Surf" is not accurate and is between 3.5 to 4°C under the real temperature. The operating manual do not mention all the Setting features (Mode button >3s) F1 to F4. Settings: Power on the thermometer, press the Mode for 3 seconds, LCD will display - F1 ( temperature buzzer alarm 32-42.5°C only working for Body ) - F2 ( temperature adjustment +3.0 to -3.0°C only working for Body ) - F3 ( Buzzer on/off ) - F4 ( Body or Surface selection ). In Fx display Press up/down button to change the Fx number. In Fx display, press Mode to enter and press the up/down button to adjust the setting. To go back to the Fx display, press de Mode button. Press the rigger button any time to exit.