I purchased this screen for use with an Arduino Mega. Using the UTFT library, I have been able to access all the features of this screen - LCD, Touch and SD card access. It is excellent value, has good colour rendition and works reliably. UTFT Setup is: UTFT myGLCD(SSD1289,38,39,40,41); UTouch myTouch(6,5,4,3,2); const int chipSelect = 53; pinMode(53, OUTPUT); Connections are: LCD Pin - Function - Arduino Pin 1 - Gnd -Ground 2 - VCC - 5V 3 - NC - No Connection 4 - RS - D38 5 - WR - D39 6 - RD - 3.3V 7 to 14 - DB8 to DB15 - D22 to D29 15 - CS - D40 16 - F_CS - No Connection 17 - REST - D41 18 - NC - No Connection 19 - LED_A - 5V 20 - NC - No Connection 21 to 28 - DB0 to DB7 - D37 to D30 29 - T_CLK - D6 30 - T_CS - D5 31 - T_DIN - D4 32 - NC - No Connection 33 - T_DO - D3 34 - T_ITQ - D2 35 - SD_DO - D50 (MISO) 36 - SD_CLK - D52 37 - SD_DIN - D51 (MOSI) 38 - SD_CS - D53 39 - NC - No Connection 40 - NC - No Connection

I purchased this screen for use with an Arduino Mega. Using the UTFT library, I have been able to access all the features of this screen - LCD, Touch and SD card access. It is excellent value, has good colour rendition and works reliably. UTFT Setup is: UTFT myGLCD(SSD1289,38,39,40,41); UTouch myTouch(6,5,4,3,2); const int chipSelect = 53; pinMode(53, OUTPUT); Connections are: LCD Pin - Function - Arduino Pin 1 - Gnd -Ground 2 - VCC - 5V 3 - NC - No Connection 4 - RS - D38 5 - WR - D39 6 - RD - 3.3V 7 to 14 - DB8 to DB15 - D22 to D29 15 - CS - D40 16 - F_CS - No Connection 17 - REST - D41 18 - NC - No Connection 19 - LED_A - 5V 20 - NC - No Connection 21 to 28 - DB0 to DB7 - D37 to D30 29 - T_CLK - D6 30 - T_CS - D5 31 - T_DIN - D4 32 - NC - No Connection 33 - T_DO - D3 34 - T_ITQ - D2 35 - SD_DO - D50 (MISO) 36 - SD_CLK - D52 37 - SD_DIN - D51 (MOSI) 38 - SD_CS - D53 39 - NC - No Connection 40 - NC - No Connection

I purchased this screen for use with an Arduino Mega. Using the UTFT library, I have been able to access all the features of this screen - LCD, Touch and SD card access. It is excellent value, has good colour rendition and works reliably. UTFT Setup is: UTFT myGLCD(SSD1289,38,39,40,41); UTouch myTouch(6,5,4,3,2); const int chipSelect = 53; pinMode(53, OUTPUT); Connections are: LCD Pin - Function - Arduino Pin 1 - Gnd -Ground 2 - VCC - 5V 3 - NC - No Connection 4 - RS - D38 5 - WR - D39 6 - RD - 3.3V 7 to 14 - DB8 to DB15 - D22 to D29 15 - CS - D40 16 - F_CS - No Connection 17 - REST - D41 18 - NC - No Connection 19 - LED_A - 5V 20 - NC - No Connection 21 to 28 - DB0 to DB7 - D37 to D30 29 - T_CLK - D6 30 - T_CS - D5 31 - T_DIN - D4 32 - NC - No Connection 33 - T_DO - D3 34 - T_ITQ - D2 35 - SD_DO - D50 (MISO) 36 - SD_CLK - D52 37 - SD_DIN - D51 (MOSI) 38 - SD_CS - D53 39 - NC - No Connection 40 - NC - No Connection

After some research, the screen works with UTFT and URTouch library but only if you write this : UTFT myGLCD(ILI9341_16,38,39,40,41); So the name of the controller is not SSD1289, but ILI9341_16... Anyway, the screen works and this is the most important... I hope my comment will be usefull !

After some research, the screen works with UTFT and URTouch library but only if you write this : UTFT myGLCD(ILI9341_16,38,39,40,41); So the name of the controller is not SSD1289, but ILI9341_16... Anyway, the screen works and this is the most important... I hope my comment will be usefull !

After some research, the screen works with UTFT and URTouch library but only if you write this : UTFT myGLCD(ILI9341_16,38,39,40,41); So the name of the controller is not SSD1289, but ILI9341_16... Anyway, the screen works and this is the most important... I hope my comment will be usefull !

Works perfectly with the right libraries and settings. A bit shady in the colours and not very bright display, but for the price it's perfect. The back does not say TFT320QVT, but TFT320QVT_9341. However, it's not an ILI9341 controller. It should be initialized as (ITDB32WC,38,39,40,41). Check this link out: http://codedemonelectronics.com.au/thinktank/arduino/tft-320-qvt-9341 Use THESE libraries for display and touch: http://www.rinkydinkelectronics.com/library.php?id=51 And this library for SD card image display: https://github.com/ghlawrence2000/UTFT_SdRaw

Works perfectly with the right libraries and settings. A bit shady in the colours and not very bright display, but for the price it's perfect. The back does not say TFT320QVT, but TFT320QVT_9341. However, it's not an ILI9341 controller. It should be initialized as (ITDB32WC,38,39,40,41). Check this link out: http://codedemonelectronics.com.au/thinktank/arduino/tft-320-qvt-9341 Use THESE libraries for display and touch: http://www.rinkydinkelectronics.com/library.php?id=51 And this library for SD card image display: https://github.com/ghlawrence2000/UTFT_SdRaw

Works perfectly with the right libraries and settings. A bit shady in the colours and not very bright display, but for the price it's perfect. The back does not say TFT320QVT, but TFT320QVT_9341. However, it's not an ILI9341 controller. It should be initialized as (ITDB32WC,38,39,40,41). Check this link out: http://codedemonelectronics.com.au/thinktank/arduino/tft-320-qvt-9341 Use THESE libraries for display and touch: http://www.rinkydinkelectronics.com/library.php?id=51 And this library for SD card image display: https://github.com/ghlawrence2000/UTFT_SdRaw

It works like hell with arduino mega and UTFT library: How to use the UTF library From the great guys at www.henningkarlsen.com/electronics Here's the initial parameters I've used to run this screen. UTFT myGLCD(GEEE32,38,39,40,41);

It works like hell with arduino mega and UTFT library: How to use the UTF library From the great guys at www.henningkarlsen.com/electronics Here's the initial parameters I've used to run this screen. UTFT myGLCD(GEEE32,38,39,40,41);

It works like hell with arduino mega and UTFT library: How to use the UTF library From the great guys at www.henningkarlsen.com/electronics Here's the initial parameters I've used to run this screen. UTFT myGLCD(GEEE32,38,39,40,41);

This TFT is very nice and worked nicely. I used this with arduino mega with shield. Actually I bought shield and TFT together from Aliexpress, since Banggood does not sell shield for this TFT. Unfortunately TFT did not worked and therefore I bought TFT from Banggood and used it with the shield that I bought from Aliexpress. Now I am sure that the TFT that I bought from Aliexpress is faulty. This is why I love Banggood. Untill now for Banggood products worked 100%. Recommended product if you want your project professional lookking.

This TFT is very nice and worked nicely. I used this with arduino mega with shield. Actually I bought shield and TFT together from Aliexpress, since Banggood does not sell shield for this TFT. Unfortunately TFT did not worked and therefore I bought TFT from Banggood and used it with the shield that I bought from Aliexpress. Now I am sure that the TFT that I bought from Aliexpress is faulty. This is why I love Banggood. Untill now for Banggood products worked 100%. Recommended product if you want your project professional lookking.

This TFT is very nice and worked nicely. I used this with arduino mega with shield. Actually I bought shield and TFT together from Aliexpress, since Banggood does not sell shield for this TFT. Unfortunately TFT did not worked and therefore I bought TFT from Banggood and used it with the shield that I bought from Aliexpress. Now I am sure that the TFT that I bought from Aliexpress is faulty. This is why I love Banggood. Untill now for Banggood products worked 100%. Recommended product if you want your project professional lookking.

Nothing to complain,just connect to Arduino UNO in 16 bit mode,as is indicated in the UTFT REQUIREMENTS PDF and load the sketch from UTFT examples,modify the name of the TFT in SSD1289 and will work for sure.

Nothing to complain,just connect to Arduino UNO in 16 bit mode,as is indicated in the UTFT REQUIREMENTS PDF and load the sketch from UTFT examples,modify the name of the TFT in SSD1289 and will work for sure.

Nothing to complain,just connect to Arduino UNO in 16 bit mode,as is indicated in the UTFT REQUIREMENTS PDF and load the sketch from UTFT examples,modify the name of the TFT in SSD1289 and will work for sure.

Testato con librerie UTFT, link http://www.henningkarlsen.com/electronics/library.php?id=51, settare nel demo UTFT_320x240 UTFT myGLCD(SSD1289,38,39,40,41); no flicker, ATTENZIONE va alimentato con 3,3 Volt, meglio usare una shield, esempio TFT LCD Mega Shield v2.2

Testato con librerie UTFT, link http://www.henningkarlsen.com/electronics/library.php?id=51, settare nel demo UTFT_320x240 UTFT myGLCD(SSD1289,38,39,40,41); no flicker, ATTENZIONE va alimentato con 3,3 Volt, meglio usare una shield, esempio TFT LCD Mega Shield v2.2

Testato con librerie UTFT, link http://www.henningkarlsen.com/electronics/library.php?id=51, settare nel demo UTFT_320x240 UTFT myGLCD(SSD1289,38,39,40,41); no flicker, ATTENZIONE va alimentato con 3,3 Volt, meglio usare una shield, esempio TFT LCD Mega Shield v2.2

Fonctionne très bien avec un Arduino Due et la bibliothèque UTFT. Dans le croquis de démonstration UTFT_Demo_320x240, changer le modèle ITDB32S pour ILI9341_16.

Fonctionne très bien avec un Arduino Due et la bibliothèque UTFT. Dans le croquis de démonstration UTFT_Demo_320x240, changer le modèle ITDB32S pour ILI9341_16.

Fonctionne très bien avec un Arduino Due et la bibliothèque UTFT. Dans le croquis de démonstration UTFT_Demo_320x240, changer le modèle ITDB32S pour ILI9341_16.

Very good product for low price, really good!! imho one of the best "little" touchscreen for arduino and related

Very good product for low price, really good!! imho one of the best "little" touchscreen for arduino and related

Very good product for low price, really good!! imho one of the best "little" touchscreen for arduino and related

Εξαιρετικό προϊόν, καλή ποιότητα.

Excellent product. Good quality.

Εξαιρετικό προϊόν, καλή ποιότητα.