Οθόνη αφής TFT LCD 2.8 ίντσας ILI9341 ανάλυσης 240x320 με θύρα σειριακής επικοινωνίας SPI
Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.
Good product. Note: if you use 3.3V supply and 3.3V logic level it works fine, but if both of the supply voltage and the logic level is 5V it will not work. So if you want to use it with a 5V system, the logic levels must be reduced down to about 3V. I think this part should be included in the description page because the current description is misleading.
Product as description. Tested ok working as expected. Tested the touchscreen and is very accurate after fine tuning of parameters. Need to use the proper library which is easy to find on github. Good product. Recommend.
Super easy to integrate with any project for color display and touch controlled devices. Used it for esp8266 based color weather station. Working like a charm.
Η οθόνη LCD των 2,8 ιντσών ελήφθη στις ΗΠΑ 20 μέρες μετά την παραγγελία. Είμαι ικανοποιημένος με την ταχεία διεκπεραίωση της παραγγελίας μου και τον εξαιρετικό χρόνο παράδοσης. Η οθόνη ήταν ακριβώς όπως περιγράφεται στην αγγελία του Μπάνγκγκουντ. Αυτή είναι η δεύτερη οθόνη που παρήγγειλα, καθώς η πρώτη είχε υποστεί ζημιές και δεν λειτούργησε σωστά. Η Μπάνγκγκουντ υπηρεσία πελατών τακτοποίησε αμέσως αυτό το πρόβλημα, οπότε παρήγγειλα τη δεύτερη μονάδα. Δοκίμασα την οθόνη και όλα πήγαν καλά. Το μόνο αρνητικό που μπορώ να αναφέρω είναι ότι η συσκευασία για αποστολή στις ΗΠΑ ήταν εντελώς απαίσια!!! Δεν υπήρχε προστασία για τις ακίδες επαφής, ούτε προστασία για την οθόνη γυαλιού. Απλά τοποθετήθηκε σε μια λεπτή, πλαστική σακούλα. Εξεπλάγην που δεν έπαθε ζημιά κατά τη διάρκεια της αποστολής. Το τμήμα Ναυτιλίας του Μπάνγκγκουντ πρέπει να τα πάει καλύτερα! Διαφορετικά, είμαι ευχαριστημένος με την αγορά μου.
the vedo of "educ8s.tv" is WRONG He says the display is slow only because he use the libreries wrong 1)if you use the SPI-software: Adafruit_ILI9341(TFT_CS,TFT_DC,TFT_MOSI,TFT_CLK,TFT_RST,TFT_MISO) the disply will be slow 2)if you use the "Hardware SPI" the display will be very fast To do this you can use the constructor: Adafruit_ILI9341(TFT_CS,TFT_DC) and connect TFT_RST to 3.3v alternatively you can use the constructor: Adafruit_ILI9341(TFT_CS,TFT_DC,TFT_RST) and #define TFT_RST 8
Όπως στην περιγραφή!
TFT
very nice display however it Is only best used with fast ic such as the esp8266 family. otherwise it is takes too long to fully update the display
As in the description! Very fast delivery!
Σας ευχαριστώ, έλαβα την οθόνη αφής μου σε καλή κατάσταση. Ανυπομονώ να αρχίσω να χρησιμοποιώ την εργασία μου.