Κριτικές πελατών

Γράψτε μια κριτική
  • Όλες οι κριτικές (3040)
  • Εικόνα (353)
  • Βίντεο (3)
  • Όλα τα αστέρια
    • Όλα τα αστέρια(3040)
    • 5 αστέρι(2836)
    • 4 αστέρι(148)
    • 3 αστέρι(28)
    • 2 αστέρι(11)
    • 1 αστέρι(17)
Ταξινόμηση κατά:
Κορυφαία κριτική
  • Κορυφαία κριτική
  • Πιο χρήσιμο
  • Πρόσφατα
Κριτικές μόνο από τη χώρα σας (Greece)
|
Εμφάνιση πρωτότυπου

Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.

  • 04/02/2016

    The cable provided is compatible with my Flysky i6 Tx for simulation on FPV Freerider

    Σχόλια (1)
    Εμφάνιση πρωτότυπου
  • 06/01/2017

    As others have said, this works great with the I6. To get this working correctly, I set the toggle on the dongle to "G5-G7 Above", plugged the cable into the port on the backside of the TX, and set the TX to "Student Mode". Make sure to check your control panel's "devices and printers" section to see if a gaming controller is present. To set your I6 in student mode, turn the power switch off and hold the two bottom trim buttons inward, and then proceed to toggle the power on. After it has powered on, release the trim buttons and hold the "OK" button to access the menu. The rest should be straight forward. Note that I have not been able to get the TX to be recognized with the I6 programmer to flash the firmware. If anyone has any luck with that, please comment.

    Σχόλια (1)
    Εμφάνιση πρωτότυπου
  • 09/12/2016

    USB dongle works witch Eachine i6 (From RTF kit Falcon 250 Pro). By default Eachine i6 doesn not send PPM signal on "trainter" connector on the back, so every time when you want to use simulator you need set in transmitter menu an option "Student mode". On this USB cable set second option "G5-G7 Above". It work for me with Freerider on Android an on Mac Os X without any additional drivers.

    Σχόλια (3)
    Εμφάνιση πρωτότυπου
  • 24/11/2014

    All the supplied software works with the simulator cable. RealFlifht G7 PhoenixRC X5 Aerofly Reflex XTR and VRC Installed everything without any problem. Only one issue - the sticker says about 5 positions of the switch, but actually there are 4 (the 5th position is VCR2). But nevertheless it is the best value of money! Highly reccomend

    Σχόλια
    Εμφάνιση πρωτότυπου
  • 27/01/2019

    ben cok begendim tam flyskya uygun cd nin icinde uygulamalarda var. kargo 8 gundr ulasti saka gibi :) cinden mi aliyoz yurt icinden mi belli degil

    Σχόλια (2)
    Εμφάνιση πρωτότυπου
  • 19/04/2016

    I got this to practice with simulators before flying the 250 I built. It took a few tries to get things working but no complaints. I'm running Windows 10. Some things to note; Pick an unused model on the transmitter and enable trainer mode. Plug in USB. Make sure your transmitter shows up in devices before launching the sim program. Calibrate. Enjoy!

    Σχόλια (1)
    Εμφάνιση πρωτότυπου
  • 08/09/2021

    Μόλυνε τον υπολογιστή μου με έναν ιό που φέρνει τον προσομοιωτή και τώρα δεν υπάρχει τρόπος να τον αφαιρέσουμε. Πλήρωσε με την Πάιλ, θα διεκδικήσω το ποσό του προσομοιωτή και τις ζημιές που προκλήθηκαν στο λάπτοπ μου.

    Σχόλια
    Εμφάνιση πρωτότυπου
  • 15/07/2020

    Muy Rápidos en la entrega a Chile el paquete llego muy bien los productos son exactamente como lo indican en sus fotografías ,funcionando sin problemas con Transmisor Flysky FS-i6X i6X 10CH

    Σχόλια
    Εμφάνιση πρωτότυπου
  • 21/04/2020

    Η διαταγή έφτασε σε 10 μέρες μέσω νιντζαβάν στη Σιγκαπούρη, παρά τη μεγάλη καθυστέρηση. Λειτουργεί καλά με το φοίνιξRC στα παράθυρα 10 βύσμα και αναπαραγωγή, δεν απαιτείται εγκατάσταση οδηγού για χρήση του USB μήλων. Το CD έχει μια ολόκληρη σουίτα λογισμικού, και το χρησιμοποίησα για να εγκαταστήσω το PhenixRC 5.0.b Δοκίμασα και τις θύρες JR και Futaba στο tx μου και δουλεύουν άψογα. Ωστόσο, η ρύθμιση των ελέγχων στο φοίνιξRC ήταν αρκετά δύσκολη... έπρεπε να σιγουρευτώ ότι όλα τα ραβδιά (συμπεριλαμβανομένου του γκαζιού) ήταν στο κέντρο πριν την εισαγωγή της σελίδας βαθμονόμησης αλλιώς το κανάλι γκάζι μου θα καταγράφει 100% είσοδος όταν τα ραβδιά είναι πάνω από 50%. Γενικά πολύ ικανοποιημένος!

    Σχόλια (4)
    Εμφάνιση πρωτότυπου
  • 25/03/2017

    This simulator cable works great with a FlySky FS-I6x and FPV Freerider on Arch Linux. Just set switch to position 2 "G5-G7 Above", attached transmitter cable, turned on transmitter, cenetered sticks, plugged into USB port and started FPV Freerider. Cable lenght is perfect. It will quickly pay for it's in saved props. Just buy it. :) I'm happy I did.

    Σχόλια (1)
    Εμφάνιση πρωτότυπου
Show:

    Σύνολο 0 σελίδες

    Πήγαινε στην σελίδα

    Ίσως σας ενδιαφέρει

    recommendation for you
    • US$46.99
    • US$56.99
    • US$7.95
    • US$20.99
    • US$12.64
    • US$89.99
    • US$96.99
    • US$7.24
    • US$54.99
    • US$23.99
    • US$74.99
    • US$41.39
    • US$10.34
    • US$259.99
    • US$12.99
    • US$61.99
    • US$43.69
    • US$82.99