Αποστολή προς United Kingdom , USD
Κορυφαία θετική κριτική για %s στο Banggood, Αγοράστε τα καλύτερα %s με τη χαμηλότερη τιμή στο Banggood. Περιηγηθείτε στην πιο χρήσιμη θετική κριτική για το %s πριν αγοράσετε., παιχνίδια rc, διασκεδαστικά σπορ, μόδα, δημοφιλή ηλεκτρονικά
Lawrence 16/01/2019
I just need to fits second extruder (on order)
0
Σχόλια (3)
υποβάλλουν
  • Lawrence I finally installed this with a second Tevo Titan extruder on my Tevo Tornado. First thing, it fitted with no modification, the hotend cover goes straight over and the heating element and thermistor are a straight swap. So far so good. It sits a little lower than standard so a bit of bed levelling needed - no problem. Then I tried printing and it clogged. Not the nozzle but the tube through the heatbreak. I cleaned it out and re-fitted it. Lowered temperature of nozzle and it clogged again.

    Απάντηση 22/01/2019
  • Lawrence Fixed it by disassembling and lining the tube with PTFE tube (suitable opened at one end) Now it seems to work fine (I hope)

    Απάντηση 22/01/2019
  • Lawrence Itclogs in the tube through the heat break. I took it apart and it put in some PTFE tube. It doesn't clog but it doesn't work consistently.

    Απάντηση 29/01/2019
Ερευνα ικανοποίησης

Κατεβάστε την εφαρμογή για να λάβετε ένα αποκλειστικό έκπτωση 10% από το κουπόνι