De-pined version: So far, this has given only head hakes, the heat shrink sleeve, comes pre heated, so you'll have to cut it to get to the pins, the polarity in the back of the receiver is wrong(only found out after welding it together), bound it in DSM2 ( welcome to fail safe town) works on the bench, go out to field, fly 30m fail safe... go back home bind it via DSMX it works, but when TX signal it's lost holds last value ( aka copter will fly away, or its never going to stop motors) After reading some reviews here, find out i need to trim throttle to -125% bind again, and re-trim to 100%, go to betaflight and set min throttle failsafe thr to 990. I ended up dismounting quad 5 times to install this properly.

De-pined version: So far, this has given only head hakes, the heat shrink sleeve, comes pre heated, so you'll have to cut it to get to the pins, the polarity in the back of the receiver is wrong(only found out after welding it together), bound it in DSM2 ( welcome to fail safe town) works on the bench, go out to field, fly 30m fail safe... go back home bind it via DSMX it works, but when TX signal it's lost holds last value ( aka copter will fly away, or its never going to stop motors) After reading some reviews here, find out i need to trim throttle to -125% bind again, and re-trim to 100%, go to betaflight and set min throttle failsafe thr to 990. I ended up dismounting quad 5 times to install this properly.

De-pined version: So far, this has given only head hakes, the heat shrink sleeve, comes pre heated, so you'll have to cut it to get to the pins, the polarity in the back of the receiver is wrong(only found out after welding it together), bound it in DSM2 ( welcome to fail safe town) works on the bench, go out to field, fly 30m fail safe... go back home bind it via DSMX it works, but when TX signal it's lost holds last value ( aka copter will fly away, or its never going to stop motors) After reading some reviews here, find out i need to trim throttle to -125% bind again, and re-trim to 100%, go to betaflight and set min throttle failsafe thr to 990. I ended up dismounting quad 5 times to install this properly.

Fonctionne parfaitement avec ma DX6 V2 DSMX sauf pour le Failsafe mais je devrais résoudre le problème avec Betaflight Configurator

Fonctionne parfaitement avec ma DX6 V2 DSMX sauf pour le Failsafe mais je devrais résoudre le problème avec Betaflight Configurator

Fonctionne parfaitement avec ma DX6 V2 DSMX sauf pour le Failsafe mais je devrais résoudre le problème avec Betaflight Configurator

биндится с модулем 4в1 под DSM2 даже лучше чем стандартные приемники и сателлиты от спектрума, после бинда не мигает а горит ровно, связь по PPM так же радует, подойдет для подключения к полетнику https://youtu.be/QmQvM8OGxtA думаю с дальностью проблем не будет

биндится с модулем 4в1 под DSM2 даже лучше чем стандартные приемники и сателлиты от спектрума, после бинда не мигает а горит ровно, связь по PPM так же радует, подойдет для подключения к полетнику https://youtu.be/QmQvM8OGxtA думаю с дальностью проблем не будет

биндится с модулем 4в1 под DSM2 даже лучше чем стандартные приемники и сателлиты от спектрума, после бинда не мигает а горит ровно, связь по PPM так же радует, подойдет для подключения к полетнику https://youtu.be/QmQvM8OGxtA думаю с дальностью проблем не будет

Un petit récepteur pour petits models, compatible avec le multimodul sur taranis !

Un petit récepteur pour petits models, compatible avec le multimodul sur taranis !

Un petit récepteur pour petits models, compatible avec le multimodul sur taranis !

I bought 2 of these for park flyer models. the range is amazing. I can fly as far and as high as I can see and still be in range! No brown outs or any binding issues at all. super little receivers!

I bought 2 of these for park flyer models. the range is amazing. I can fly as far and as high as I can see and still be in range! No brown outs or any binding issues at all. super little receivers!

I bought 2 of these for park flyer models. the range is amazing. I can fly as far and as high as I can see and still be in range! No brown outs or any binding issues at all. super little receivers!

No issues binding it with my Spektrum DX9 EU. Using it for a foamy. I bought the pinned version and haven't encountered any problems with it yet. Still have to test the range though.

No issues binding it with my Spektrum DX9 EU. Using it for a foamy. I bought the pinned version and haven't encountered any problems with it yet. Still have to test the range though.

No issues binding it with my Spektrum DX9 EU. Using it for a foamy. I bought the pinned version and haven't encountered any problems with it yet. Still have to test the range though.

Έχω ήδη αυτόν τον δέκτη σε χρήση και βρίσκω ότι αξίζει τα λεφτά του. Είναι σχετικά μικρό και ελαφρύ. Έτσι, μπορεί να χρησιμοποιηθεί τόσο σε αεροπλάνο, σε ελικόπτερο όσο και, όπως φαίνεται στη δεύτερη εικόνα, σε ένα αγωνιστικό Chticat.

ich habe bereits diesen Empfänger in Gebrauch und finde, er ist sein Geld wert. Er ist verhältnismäßig klein und leicht. Somit ist er sowohl in einem Flugzeug, in Copter und wie auch, auf dem zweiten Bild zu sehen, in einem Chticat-racer verwendbar.

Έχω ήδη αυτόν τον δέκτη σε χρήση και βρίσκω ότι αξίζει τα λεφτά του. Είναι σχετικά μικρό και ελαφρύ. Έτσι, μπορεί να χρησιμοποιηθεί τόσο σε αεροπλάνο, σε ελικόπτερο όσο και, όπως φαίνεται στη δεύτερη εικόνα, σε ένα αγωνιστικό Chticat.

Τέλεια ταιριαστό για το στιλέτο ελεύθερης πτήσης που φτιάχνω. Επίσης, χρησιμοποιώντας έναν ηλεκτρονικό ουρανό χωρίς βούρτσες και τον έλεγχο ταχύτητας που έφερα από εσάς

Perfect fit for Free flight Stylus I am building. Also using a brushless motor e-sky and Speed Control that I brought from you

Τέλεια ταιριαστό για το στιλέτο ελεύθερης πτήσης που φτιάχνω. Επίσης, χρησιμοποιώντας έναν ηλεκτρονικό ουρανό χωρίς βούρτσες και τον έλεγχο ταχύτητας που έφερα από εσάς

Πολύ καλός δέκτης για χαμηλή τιμή

Very good receiver for a low prive. Very recommended

Πολύ καλός δέκτης για χαμηλή τιμή

Solid DSMX-receiver. Perfect for my airplane. Easy to connect the different channels. No adjustst haveto be done. Only some channels on my transmitter (Devo10 ) have to be reversed. Binding is no problem with the supplied cable. Thats all

Solid DSMX-receiver. Perfect for my airplane. Easy to connect the different channels. No adjustst haveto be done. Only some channels on my transmitter (Devo10 ) have to be reversed. Binding is no problem with the supplied cable. Thats all

Solid DSMX-receiver. Perfect for my airplane. Easy to connect the different channels. No adjustst haveto be done. Only some channels on my transmitter (Devo10 ) have to be reversed. Binding is no problem with the supplied cable. Thats all