Ανταλλακτικό ανάφλεξης για κινητήρα αερίου με μηχανή ροπής και εσωτερική καύση Stirling DIY έργο
Ένα μέρος της κριτικής έχει μεταφραστεί αυτόματα.
Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.
Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!
Products delivered to you Really wonderful
replacement worked fine . Dont use 2 cell lipo. It makes the smoke come out.
Ok, this is the third CDI I’ve bought including the one that came with the blue “Hit & Miss” engine I bought last year. Hopefully this is the one that doesn’t burn up and stop working after a couple minutes of runtime. I won’t be buying another one after this, considering I’m into this engine for over $300.00 now.
I use this ignition for my own built engines.
Ware erhalten Alles bestens OK
Liebe Verkäufer die Sendung ist soeben bei mir angekommen, leider fehlt der Hallsensor, ein Betrieb der Anlage ist daher nicht möglich. Bitte senden Sie mir dieses Teil nach. Mit freundlichen Grüßen E.Rau
Χρησιμοποιώ αυτές τις μηχανές στις οικογενειακές μου κατασκευές, είναι πολύ καλές, λειτουργούν καλά σε 6 βολτ και τίποτα λιγότερο. Απλά συνδέστε έναν αισθητήρα εφέ διαδρόμου μέσω ενός μολύβδου επέκτασης σερβο και είστε έτοιμοι και λειτουργούν.
γρήγορη αποστολή, εμπορεύματα super, πολύ κρίμα που ο πομπός Hall δεν είναι εκεί